Did my passenger side head gasket on my XFR. Looking for some help on how to set the timing, engine was at TDC before the cylinder head was removed, I Only removed the cams and chain on the passenger side that I was replacing

 

Get the AJ133 Technical Training doc from my Dropbox here: https://www.dropbox.com/s/8y4iax9hm2...%20V8.pdf?dl=0
Then go to pages 2-28 to 2-43 for an explanation of the timing system on the SC version.
Dunno how much that will help you set the timing but it's better than nothing!

 

lock tools