What is your choice for an XJL mod, if any?
#41
Just purchased the XJ genuine factory lip spoiler for trunk. Will post pics when installed. I actually purchased direct from the Jaguar factory in UK and they are sending me two for a great deal. So if anyone is interested in the other, I may have an extra one for you.
Last edited by SrJaguar; 01-14-2015 at 08:28 PM.
#44
Join Date: Jan 2012
Location: Reynolds Lake Oconee, GA USA
Posts: 1,812
Received 516 Likes
on
414 Posts
Model Year: 201?
Engine: V6 Supercharged, V8 Naturally Aspirated, V8 Supercharged
Model: Base XJ, Portfolio, Supercharged, SuperSport, XJR
AWD or not
Any other options that may be relevant.
All of these are X351 models but are configured differently. V8 supercharged and up have different suspensions as does the XJR.
So when one is trying to discuss handling there is a difference based on your particular X351, that's all I'm trying to say.
Engine: V6 Supercharged, V8 Naturally Aspirated, V8 Supercharged
Model: Base XJ, Portfolio, Supercharged, SuperSport, XJR
AWD or not
Any other options that may be relevant.
All of these are X351 models but are configured differently. V8 supercharged and up have different suspensions as does the XJR.
So when one is trying to discuss handling there is a difference based on your particular X351, that's all I'm trying to say.
#46
#48
Mina Gallery Spoiler Installed!
It finally got warm enough today to install my Mina Gallery spoiler. It was very easy to do, as follows:
Step 1. Lay the spoiler on the trunk lid and align it with equal gaps on both sides.
Step 2. Put a piece of masking tape on the top edge of the spoiler and another piece of masking tape on the trunk lid adjacent to the tape on the spoiler, so you can mark both pieces of tape as an alignment guide for installing the spoiler on the trunk.
Step 3. The spoiler attaches to the trunk lid with double-sided 1/2" 3M auto trim tape. Prep the trunk lid and spoiler surfaces to remove all wax/grease and then wipe with 3M adhesion primer to insure a good bond. Put 2 rows of tape across the bottom of the upper inside of the spoiler and carefully align the marks on the masking tape.
Step 4. Press down and you're done!
Stuart
Step 1. Lay the spoiler on the trunk lid and align it with equal gaps on both sides.
Step 2. Put a piece of masking tape on the top edge of the spoiler and another piece of masking tape on the trunk lid adjacent to the tape on the spoiler, so you can mark both pieces of tape as an alignment guide for installing the spoiler on the trunk.
Step 3. The spoiler attaches to the trunk lid with double-sided 1/2" 3M auto trim tape. Prep the trunk lid and spoiler surfaces to remove all wax/grease and then wipe with 3M adhesion primer to insure a good bond. Put 2 rows of tape across the bottom of the upper inside of the spoiler and carefully align the marks on the masking tape.
Step 4. Press down and you're done!
Stuart
Last edited by Stuart S; 04-08-2015 at 10:52 PM.
The following 3 users liked this post by Stuart S:
The following users liked this post:
Stuart S (04-09-2015)
#51
#52
#53
+1 against spoiler and the hood ornament. Our cars look so beautiful without them IMHO. My list of mods
1. Rotary shift mod (modstickers.com)
2. Subwoofer Addition (rear factory sub removal)
3. XPEL Paint protection film
4. MGP Caliper Covers (calipercovers.com)
5. LED interior and exterior lights
6. Logo door light projector
7. Pedal Covers and Dead Pedal R (minagallery.com)
8. Ofcourse rims if you have the cash to spend for a good set that's staggered.
I already have illumination package but if not it looks great! a must have IMHO.
1. Rotary shift mod (modstickers.com)
2. Subwoofer Addition (rear factory sub removal)
3. XPEL Paint protection film
4. MGP Caliper Covers (calipercovers.com)
5. LED interior and exterior lights
6. Logo door light projector
7. Pedal Covers and Dead Pedal R (minagallery.com)
8. Ofcourse rims if you have the cash to spend for a good set that's staggered.
I already have illumination package but if not it looks great! a must have IMHO.
#54
Really like the spoiler.
It finally got warm enough today to install my Mina Gallery spoiler. It was very easy to do, as follows:
Step 1. Lay the spoiler on the trunk lid and align it with equal gaps on both sides.
Step 2. Put a piece of masking tape on the top edge of the spoiler and another piece of masking tape on the trunk lid adjacent to the tape on the spoiler, so you can mark both pieces of tape as an alignment guide for installing the spoiler on the trunk.
Step 3. The spoiler attaches to the trunk lid with double-sided 1/2" 3M auto trim tape. Prep the trunk lid and spoiler surfaces to remove all wax/grease and then wipe with 3M adhesion primer to insure a good bond. Put 2 rows of tape across the bottom of the upper inside of the spoiler and carefully align the marks on the masking tape.
Step 4. Press down and you're done!
Stuart
Step 1. Lay the spoiler on the trunk lid and align it with equal gaps on both sides.
Step 2. Put a piece of masking tape on the top edge of the spoiler and another piece of masking tape on the trunk lid adjacent to the tape on the spoiler, so you can mark both pieces of tape as an alignment guide for installing the spoiler on the trunk.
Step 3. The spoiler attaches to the trunk lid with double-sided 1/2" 3M auto trim tape. Prep the trunk lid and spoiler surfaces to remove all wax/grease and then wipe with 3M adhesion primer to insure a good bond. Put 2 rows of tape across the bottom of the upper inside of the spoiler and carefully align the marks on the masking tape.
Step 4. Press down and you're done!
Stuart
The following users liked this post:
Stuart S (07-24-2015)
#58
Part Number: C2D25247
https://accessories.jaguar.com/us/en...#tertiary-tabs
The following users liked this post:
XJsss (10-26-2021)
Thread
Thread Starter
Forum
Replies
Last Post
Manjag
S-Type / S type R Supercharged V8 ( X200 )
4
09-29-2015 11:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)