Cruise control wiring
#1
Cruise control wiring
Last summer the dreaded "Cruise control not available" started to show up randomly as I drove. Eventually I became always illuminated. Since then I had a issue with the suspension compressor and am in the process of rebuilding. Thought I'd look at the front sonar under the bumper cover. While inspecting there was a severed wire which is light brown with a white tracer. I used a high quality but connector and shrink tube to repair. During the diagnosis of the compressor I accidentally turned the car on with the front sonar unplugged. Still have the CCNA message. I comes on differently now as the car is started rather than when it started to move.
Anyone have a schematic of the wiring to see if the severed tan w/white tracer actually does? I hope it is not resistance measuring …
Anyone have a schematic of the wiring to see if the severed tan w/white tracer actually does? I hope it is not resistance measuring …
Thread
Thread Starter
Forum
Replies
Last Post
SilverXJX356
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
5
03-19-2019 05:30 AM
SilverXJX356
New Member Area - Intro a MUST
12
03-19-2019 04:51 AM
sweatyfox
XK8 / XKR ( X100 )
47
01-19-2017 01:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)