Tuning Questions with 2.6 Kenne BEll Big Bore
#1
10-09-2017, 03:32 PM
Tuning Questions with 2.6 Kenne BEll Big Bore
Hey Guys,
Had a baby and a slew of xjr related issues made me put the Kenne Bell project on hold. But Im getting ready to start this up again(along with my xkr project)
I had bought an abaco MAF to tweak the transfer function for the large injectors however I know people were starting to play around with tuning last I checked. What Id really like to do is have a nice intake tube made with a slot style MAF....If this can be accommodated. How far along have we gotten with being able to tune? Ive tuned my own vehicles using SCT software for my fords and a Megasquirt III setup "race car" but unsure I want to tackle the mysterious Jag (which I have no equipment or software to do so with).
The only real mods I have is the 2.6 TS, bored TB and backhalf exhaust. I do plan on replacing the front half and cats as well as converting to a tractionloc rear and perhaps gears as I recall someone being able to account for that in a tune now. Any help would be appreciated. Who to talk to etc...Ideas
Thanks!
Had a baby and a slew of xjr related issues made me put the Kenne Bell project on hold. But Im getting ready to start this up again(along with my xkr project)
I had bought an abaco MAF to tweak the transfer function for the large injectors however I know people were starting to play around with tuning last I checked. What Id really like to do is have a nice intake tube made with a slot style MAF....If this can be accommodated. How far along have we gotten with being able to tune? Ive tuned my own vehicles using SCT software for my fords and a Megasquirt III setup "race car" but unsure I want to tackle the mysterious Jag (which I have no equipment or software to do so with).
The only real mods I have is the 2.6 TS, bored TB and backhalf exhaust. I do plan on replacing the front half and cats as well as converting to a tractionloc rear and perhaps gears as I recall someone being able to account for that in a tune now. Any help would be appreciated. Who to talk to etc...Ideas
Thanks!
#2
10-09-2017, 03:55 PM
Veteran Member
https://www.jaguarforums.com/forum/x...epower-168474/
The above thread is quite interesting but somewhat disappointing with regards to pre 2006 XJRs.
It will give you a good idea of what Cambo was doing with regards to software tuning.
I am currently working on a crossover pipe with resonator delete.
The above thread is quite interesting but somewhat disappointing with regards to pre 2006 XJRs.
It will give you a good idea of what Cambo was doing with regards to software tuning.
I am currently working on a crossover pipe with resonator delete.
The following users liked this post:
XxSlowpokexX (10-09-2017)
#3
10-09-2017, 04:55 PM
#4
10-09-2017, 04:59 PM
#5
10-09-2017, 07:09 PM
Veteran Member