X350 engine swaps
#1
X350 engine swaps
Hi, this is my first post and its packed with a couple questions as I really want to turn my XJ8 into a monster.
I have a X350 that's been sitting on my driveway for several years now and for that time I've had the urge to replace the underpowered 3.6 litre AJV8 with something a little more interesting with more than 500hp...
After having looked into it the major reason they remain untouched is due to the can bus but XKRs are being LS swapped and don't they share the same can architecture as the X350?
I've also looked into the possibility of using an Arduino to replicate messages for CANBUS if there was a different Engine, Gearbox and diff ratio etc to make the the CANBUS system believe the car is stock. However this will take a year or 2 for me to figure it out and also save up for the parts themselves so in the meantime I'll make her roadworthy again.
I have a X350 that's been sitting on my driveway for several years now and for that time I've had the urge to replace the underpowered 3.6 litre AJV8 with something a little more interesting with more than 500hp...
After having looked into it the major reason they remain untouched is due to the can bus but XKRs are being LS swapped and don't they share the same can architecture as the X350?
I've also looked into the possibility of using an Arduino to replicate messages for CANBUS if there was a different Engine, Gearbox and diff ratio etc to make the the CANBUS system believe the car is stock. However this will take a year or 2 for me to figure it out and also save up for the parts themselves so in the meantime I'll make her roadworthy again.
#2
Thread
Thread Starter
Forum
Replies
Last Post
andrew lowe
XJ XJ8 / XJR ( X308 )
1
02-17-2014 02:16 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)