XJ8 Mesh Grille Inserts
#1
XJ8 Mesh Grille Inserts
I received my upper and lower mesh grille inserts today, but there was no installation instructions except for:
You can easily install it yourself!
Simply remove bottom Grill and install mesh. Remove top grille, install and reattach.
That's like a cake recipe that says: mix cake, bake!
Anyone had any experience installing the mesh inserts on an XJ8? Any tips?
Thanks
You can easily install it yourself!
Simply remove bottom Grill and install mesh. Remove top grille, install and reattach.
That's like a cake recipe that says: mix cake, bake!
Anyone had any experience installing the mesh inserts on an XJ8? Any tips?
Thanks
#2
They are a bit of a bitch to install
I had my supplier (Mina Gallery) on the phone as they were so tight I thought I had the wrong size.
Anyways, if no one else has them on hand I have a set of install instructions buried somewhere in my lock up.I will copy and mail you a set/scan email.
In the meantime try this old link on here...
https://www.jaguarforums.com/forum/x...h-grill-50080/
or contact Mina, Chris is pretty cool, I am sure he would help or send instructions even if they are not his...
Chris
<<<PLEASE NOTE OUR NEW E-MAIL AND WEBSITE>>>
Info@MinaGallery.com
www.MinaGallery.com
Toll Free 1-866-310-5247
Local/International 818-342-0273 (Note NEW Number)
Anyways, if no one else has them on hand I have a set of install instructions buried somewhere in my lock up.I will copy and mail you a set/scan email.
In the meantime try this old link on here...
https://www.jaguarforums.com/forum/x...h-grill-50080/
or contact Mina, Chris is pretty cool, I am sure he would help or send instructions even if they are not his...
Chris
<<<PLEASE NOTE OUR NEW E-MAIL AND WEBSITE>>>
Info@MinaGallery.com
www.MinaGallery.com
Toll Free 1-866-310-5247
Local/International 818-342-0273 (Note NEW Number)
Last edited by DB6; 08-15-2011 at 08:39 PM.
The following 2 users liked this post by DB6:
Fairlane500 (08-16-2011),
JimC64 (08-15-2011)
#3
Mina Grill Install - In Pics
No verbiage, just pics...
http://www.peace-train.com/tom/jaggrill.htm
If I recall, releasing the stock grill frame's lower 'clips' was a snag for me. The 'release points' can be seen in the third photo, on top of bumper, to the inside of the headlamps.
http://www.peace-train.com/tom/jaggrill.htm
If I recall, releasing the stock grill frame's lower 'clips' was a snag for me. The 'release points' can be seen in the third photo, on top of bumper, to the inside of the headlamps.
Last edited by magmedia; 08-15-2011 at 09:08 PM.
The following users liked this post:
Fairlane500 (08-16-2011)
#4
I had my supplier (Mina Gallery) on the phone as they were so tight I thought I had the wrong size.
Anyways, if no one else has them on hand I have a set of install instructions buried somewhere in my lock up.I will copy and mail you a set/scan email.
In the meantime try this old link on here...
https://www.jaguarforums.com/forum/x...h-grill-50080/
or contact Mina, Chris is pretty cool, I am sure he would help or send instructions even if they are not his...
Chris
<<<PLEASE NOTE OUR NEW E-MAIL AND WEBSITE>>>
Info@MinaGallery.com
Jaguar XK8 XJ8 XKR XJR X-TYPE S-TYPE Performance Parts Mesh Grilles Upgrades and Accessories
Toll Free 1-866-310-5247
Local/International 818-342-0273 (Note NEW Number)
Anyways, if no one else has them on hand I have a set of install instructions buried somewhere in my lock up.I will copy and mail you a set/scan email.
In the meantime try this old link on here...
https://www.jaguarforums.com/forum/x...h-grill-50080/
or contact Mina, Chris is pretty cool, I am sure he would help or send instructions even if they are not his...
Chris
<<<PLEASE NOTE OUR NEW E-MAIL AND WEBSITE>>>
Info@MinaGallery.com
Jaguar XK8 XJ8 XKR XJR X-TYPE S-TYPE Performance Parts Mesh Grilles Upgrades and Accessories
Toll Free 1-866-310-5247
Local/International 818-342-0273 (Note NEW Number)
Thanks
j./
#5
The following users liked this post:
Fairlane500 (08-16-2011)
#7
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)