1996 XJR - obd-ii compliant?
#22
Mike
As requested I got a chance to look at Torque today. As aholbro1 suggested, Torque will let you configure anything that is available on any car as a measurement.
I set up Torque with graphs for Voltage on Sensors 1 and 2 for Banks 1 and 2. As expected, the readings for Sensor 1 for Banks 1 and 2 were normal, and for Sensor 2 not data was displayed.
As requested I got a chance to look at Torque today. As aholbro1 suggested, Torque will let you configure anything that is available on any car as a measurement.
I set up Torque with graphs for Voltage on Sensors 1 and 2 for Banks 1 and 2. As expected, the readings for Sensor 1 for Banks 1 and 2 were normal, and for Sensor 2 not data was displayed.
#23
Well that's interesting I don't get that, I get readings where I shouldn't. I'll test again tomorrow and report back.
I do appreciate your time and effort. You may have seen my mystery misfire thread where I am trying to work out what's wrong. One of my O2 sensors seems to be dead but the other 'three' work almost identically.
I think I'll take them all off and put them on again.
Mike
I do appreciate your time and effort. You may have seen my mystery misfire thread where I am trying to work out what's wrong. One of my O2 sensors seems to be dead but the other 'three' work almost identically.
I think I'll take them all off and put them on again.
Mike
Thread
Thread Starter
Forum
Replies
Last Post
Klriess
S-Type / S type R Supercharged V8 ( X200 )
9
02-24-2022 01:21 PM
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)