What parts need to be reproduced?
#1
What parts need to be reproduced?
The JEC is asking members what parts members would like/need to be remade so I am putting it out there, what should I be telling them?
I am going to say
Exhaust manifolds (unavailable)
Coils (quality/availability)
XJR6 MAF (unavailable)
So anything else?
Peter
I am going to say
Exhaust manifolds (unavailable)
Coils (quality/availability)
XJR6 MAF (unavailable)
So anything else?
Peter
The following 4 users liked this post by Cafcpete:
#2
The following 2 users liked this post by Nobeel Masri:
general_piffle (04-29-2022),
littlelic69 (04-29-2022)
#3
The following 3 users liked this post by motorcarman:
#4
The following 3 users liked this post by Nobeel Masri:
#5
The following 6 users liked this post by Disco Gold:
Don B (05-12-2022),
Doug (05-01-2022),
Mkii250 (04-30-2022),
motorcarman (04-30-2022),
Spud Maat (04-30-2022),
and 1 others liked this post.
#6
#7
Trending Topics
#8
Its the Jaguar Enthusiasts' Club https://jec.org.uk/ They are working with SNG Barratt to work out what they need to make, they have already introduced many items but what to know what is needed the most..
#9
#10
#11
#14
Here's my starter:-
Rear ABS sensors (they're only currently available for the very late x300s from VIN 801672 ) LNA2222AB LNA2223AB
Waist seals with black finish, front now unavailable - GNA1710BF GNA1711BF Rear still available but crazy prices - GNA2520BF GNA2521BF
Accelerator pedal pad CCC6762
Intermediate handbrake cable MNA5169AB
Centre Console Switch panel moulding (These are getting very brittle with age and the screw lugs break off) LNA6318AA/BA/CA/DA
XJR6 MAF LNA1620AA
XJR6 Throttle cable (Traction Control Actuator to Throttle Body section) for RHD vehicles. MNA4620LE
XJR6 Supercharger bypass actuator (These are starting to fail) NBD7703AA>NBD7703AB
Rear ABS sensors (they're only currently available for the very late x300s from VIN 801672 ) LNA2222AB LNA2223AB
Waist seals with black finish, front now unavailable - GNA1710BF GNA1711BF Rear still available but crazy prices - GNA2520BF GNA2521BF
Accelerator pedal pad CCC6762
Intermediate handbrake cable MNA5169AB
Centre Console Switch panel moulding (These are getting very brittle with age and the screw lugs break off) LNA6318AA/BA/CA/DA
XJR6 MAF LNA1620AA
XJR6 Throttle cable (Traction Control Actuator to Throttle Body section) for RHD vehicles. MNA4620LE
XJR6 Supercharger bypass actuator (These are starting to fail) NBD7703AA>NBD7703AB
Last edited by JudgeGeoff; 05-10-2022 at 05:30 AM.
#15
The following users liked this post:
general_piffle (05-10-2022)
#17
Exhaust manifolds are still available from Aston Martin, the 1995-97 DB7 I6 uses the same manifolds. They are the same as X300 with EGR and Air Injection, these can be plugged for use on a car without it. Not cheap but could be worse!
The following 4 users liked this post by Ivar82:
#18
Thanks Cafcpete for starting this thread.
Greta list everyone. It is becoming increasingly difficult to get parts for X300. I'm sure a number of cars are no no longer on the road for lack of parts.
For anyone needing to do a major engine rebuild, pistons will need to go on the list of part that it would be helpful for SNG Barratt to re-manufacture.
Greta list everyone. It is becoming increasingly difficult to get parts for X300. I'm sure a number of cars are no no longer on the road for lack of parts.
For anyone needing to do a major engine rebuild, pistons will need to go on the list of part that it would be helpful for SNG Barratt to re-manufacture.
The following users liked this post:
Cafcpete (05-14-2022)
#19
The following 3 users liked this post by someguywithajag: