Anyone know if Transgo are still in business?
#1
Anyone know if Transgo are still in business?
Hi guys, long time no chat. I am refitting an engine change with gearbox, and thought it the ideal opportunity to fit the Transgo ZF5HP-24 Pressure Regulator Repair Kit, having read lots of good reports.
The problem is, I never get a reply to emails sent (5 emails now) asking the cost + shipping to the UK. I wondered if they were still 'around' so to spea, but the website is up and running!
It seems a shame not to fit it, although I know it can be done with the box in situ, however, situ or not I still need to get in touch to get one. My first two emails included pictures of the bottom of my gearbox with the lower pan off, I am 95% certain I have the box that the Transgo part can be fitted to.
Can anyone offer suggestions of how I progress this?
Paul
The problem is, I never get a reply to emails sent (5 emails now) asking the cost + shipping to the UK. I wondered if they were still 'around' so to spea, but the website is up and running!
It seems a shame not to fit it, although I know it can be done with the box in situ, however, situ or not I still need to get in touch to get one. My first two emails included pictures of the bottom of my gearbox with the lower pan off, I am 95% certain I have the box that the Transgo part can be fitted to.
Can anyone offer suggestions of how I progress this?
Paul
#2
Paul, I have no idea if they are still in operation, but the sets itself can still be found on eBay.
Need to give it a thorough check though for compatibility.
Sample: https://www.ebay.com/itm/351708237931
Need to give it a thorough check though for compatibility.
Sample: https://www.ebay.com/itm/351708237931
#3
I’m going to have one installed this week by a local transmission shop (not AAMCO) that we’ve been dealing with for years.
Here’s a link for the US EBay which I’m sure you can buy from.
https://www.ebay.com/itm/Transgo-Pre...-127632-2357-0
#4
Thank you to addicted2boost for the link, and great to hear from you again Eric . I've been away a long time, but the magic and knowledge of the people on this site has never changed.. still first class.
I have ordered the part direct from the US. I have done as much research into this as I can from here, and I am certain it fits my gearbox, if it doesn't Im sure it will be useful to someone else.
I will email you Eric, as there's some work on the 308 Electrical Guide I've been doing while spending week after week in hospital. Basically, I have built a database for it, I think it will be very useful? Would like to run it past a few of you guys to see what you think, just a few bugs to sort out then it's ready for a trial run.
Paul
I have ordered the part direct from the US. I have done as much research into this as I can from here, and I am certain it fits my gearbox, if it doesn't Im sure it will be useful to someone else.
I will email you Eric, as there's some work on the 308 Electrical Guide I've been doing while spending week after week in hospital. Basically, I have built a database for it, I think it will be very useful? Would like to run it past a few of you guys to see what you think, just a few bugs to sort out then it's ready for a trial run.
Paul
The following users liked this post:
ericjansen (03-15-2022)
#5
#7
Trending Topics
#9
Hi Addicted2boost, many thanks for the suggestion.. makes perfect sense. Any idea(s) how long this takes or any other pitfalls? I had a really bad experience many years ago removing something from a gearbox and all kinds of springs, ball-bearings etc flew everywhere?
Paul
Paul
Filling transmission with oil after is a bit of a pain, but again - it's been done by many.
Last edited by NJ2003XJ8; 04-01-2022 at 09:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)