Jaguar Logo Boot/Trunk Badge
#1
#2
They make an auto attachment glue -- one part -- fast drying. Just for this application. Comes in a tube --3M
You could also use any type of epoxy -- just make sure to not overdo it. Don't want squeeze out ... the fast setting would be my preference in the epoxy.
Make sure you get all the old glue off
You could also use any type of epoxy -- just make sure to not overdo it. Don't want squeeze out ... the fast setting would be my preference in the epoxy.
Make sure you get all the old glue off
The following users liked this post:
omgimali (11-05-2016)
#3
They make an auto attachment glue -- one part -- fast drying. Just for this application. Comes in a tube --3M
You could also use any type of epoxy -- just make sure to not overdo it. Don't want squeeze out ... the fast setting would be my preference in the epoxy.
Make sure you get all the old glue off
You could also use any type of epoxy -- just make sure to not overdo it. Don't want squeeze out ... the fast setting would be my preference in the epoxy.
Make sure you get all the old glue off
#5