So I'm in Japan and have my 1999 XJR back in the California being cared for by a friend. Well said friend must of leaned on a cracked the plastic hose that goes from the engine back to the air intake (I did this within the first 3 months of having the car myself) and it ended up melting the wires and connector that plugs into the MAF.

Looks like I need to buy a new connector,... Just looking for ideas and anyone who maybe went through something similar.

 

5 pin toyota/subaru maf connector

 

And buy some 3/4" hose, cut off both ends of that full load breather hose and put them on each end of the 3/4" hose of the same length as that plastic crap and you won't have this problem again.

 

Thank you. Any particular make or model year?

 

I actually did this when it first happened to me as alluded to previously since I needed it replaced immediately until the OEM part arrived. The spare part was still in the trunk, but my buddy decided duck tape was better,... smh.

 

https://www.michiganmotorsports.com/...YaAofzEALw_wcB

 

I've ordered this MAF connector. I assume it will need to be spliced in or is it long enough to plug and play?

Thank you!