XJ XJ8 / XJR ( X308 ) 1997 - 2003

My final project: 2016

Thread Tools
 
Search this Thread
 
  #61  
Old 09-29-2016, 05:56 AM
JTsmks's Avatar
Veteran Member
Join Date: Nov 2012
Location: Fleming Island, FL
Posts: 1,756
Received 723 Likes on 556 Posts
Default

tire size is on the label on the tire in the pic (255/50/16)
 

Last edited by JTsmks; 09-29-2016 at 06:51 AM.
  #62  
Old 09-29-2016, 10:06 AM
XJR-99's Avatar
Senior Member
Thread Starter
Join Date: Nov 2011
Location: Europe
Posts: 875
Received 320 Likes on 218 Posts
Default

Originally Posted by dc4prez
you need to buy a boat Sami, you have an anchor - love the tyres - what size
I have a feeling that we have been in same boat last few years
 
  #63  
Old 11-02-2016, 09:11 AM
XJR-99's Avatar
Senior Member
Thread Starter
Join Date: Nov 2011
Location: Europe
Posts: 875
Received 320 Likes on 218 Posts
Default

Project updates: Bigger, adjustable MAF is finally there. Took a while to find right calibration for idle, but runs very nicely now even bit lot bigger fuel injectors. Unfortunately winter and snow came today and not possible to ajust the MAF for different closed loop rpms, but they should be quite close already. WOT adjusting needs open roads or dyno.

Pulley ratio has been changed to 2.22 and if change to 50-100% E85 goes well then next and most probably final step would be 2.42. Exhaust gets maybe X-Pipe.

The major target is just to have a lot of trouble free miles, since too much bad things has happened during last three years. If motivation will be enough high for testing 1/4mile next summer I think 11.3 would be very realistic target with this setup, but before that the cat wants to sleep well next five months
 
Attached Thumbnails My final project: 2016-maf_tuning_1.jpg  
The following users liked this post:
Sean B (04-18-2017)
  #64  
Old 11-18-2016, 03:09 PM
SteveM's Avatar
Senior Member
Join Date: Apr 2009
Location: NY
Posts: 684
Received 97 Likes on 69 Posts
Default

It's too bad you couldn't get any runs in this year. I was looking forward to seeing what kind of numbers you would run.
Oh well, I guess I can claim the fastest XJR for a little while longer
 
  #65  
Old 11-19-2016, 06:55 AM
Addicted2boost's Avatar
Veteran Member
Join Date: Mar 2015
Posts: 2,658
Received 1,032 Likes on 812 Posts
Default

Put some tire chains on that sled and go out and drive it like you stole it.
 
  #66  
Old 11-19-2016, 08:21 AM
XJR-99's Avatar
Senior Member
Thread Starter
Join Date: Nov 2011
Location: Europe
Posts: 875
Received 320 Likes on 218 Posts
Default

Originally Posted by Addicted2boost
Put some tire chains on that sled and go out and drive it like you stole it.
No problems
 
Attached Thumbnails My final project: 2016-winter1.jpg  
  #67  
Old 11-20-2016, 10:21 AM
Count Iblis's Avatar
Senior Member
Join Date: Mar 2011
Location: 'Out West', USA
Posts: 660
Received 293 Likes on 163 Posts
Default

Originally Posted by XJR-99
No problems

My Ex fiancé was from near Rovaniemi and we also spent time in Oulu and Torneo. They don't salt the roads up there, I believe, so I would see a lot of old W124 Mercedes without any rust....
 
  #68  
Old 11-20-2016, 11:48 AM
XJR-99's Avatar
Senior Member
Thread Starter
Join Date: Nov 2011
Location: Europe
Posts: 875
Received 320 Likes on 218 Posts
Default

Originally Posted by Count Iblis
My Ex fiancé was from near Rovaniemi and we also spent time in Oulu and Torneo. They don't salt the roads up there, I believe, so I would see a lot of old W124 Mercedes without any rust....
You are right. We call them "Lapland cars". My car is very well rust protected but after the first winter driving it daily I realised that better to put it into the garage waiting for summer. Winter tires are required here from Dec to end of Feb. Most people use studded tires and this makes roads to very bad condition. That photo was taken a couple years ago since I wanted to take car out of garage for unsalted small rods at -20C. During last weeks for a reason i dn't know, all rods have been unsalted even here in southern Finland - which is basically good for all others than heavy trcuks. Actually all early month snow has gone and we have +5C at the moment - and dark, dark and again dark.
 
  #69  
Old 11-20-2016, 12:03 PM
XJR-99's Avatar
Senior Member
Thread Starter
Join Date: Nov 2011
Location: Europe
Posts: 875
Received 320 Likes on 218 Posts
Default

Originally Posted by SteveM
It's too bad you couldn't get any runs in this year. I was looking forward to seeing what kind of numbers you would run.
Oh well, I guess I can claim the fastest XJR for a little while longer
Let's see if Dave goes for 1/4mile. I know he has some serious power under the hood.....and there is summer in Australia ( like almost always ).
 
  #70  
Old 02-14-2017, 08:16 AM
XJR-99's Avatar
Senior Member
Thread Starter
Join Date: Nov 2011
Location: Europe
Posts: 875
Received 320 Likes on 218 Posts
Default

Originally Posted by Count Iblis
My Ex fiancé was from near Rovaniemi and we also spent time in Oulu and Torneo. They don't salt the roads up there, I believe, so I would see a lot of old W124 Mercedes without any rust....
Do you agree these facts?

WARNING: OT stuff

 
  #71  
Old 02-15-2017, 11:22 AM
Count Iblis's Avatar
Senior Member
Join Date: Mar 2011
Location: 'Out West', USA
Posts: 660
Received 293 Likes on 163 Posts
Default

Originally Posted by XJR-99
Do you agree these facts?

WARNING: OT stuff


https://www.youtube.com/watch?v=yP9Qt-bSz40&sns=em

They didn't mention the Moomins!
 
  #72  
Old 02-17-2017, 12:16 PM
XJR-99's Avatar
Senior Member
Thread Starter
Join Date: Nov 2011
Location: Europe
Posts: 875
Received 320 Likes on 218 Posts
The following users liked this post:
Sean B (04-18-2017)
  #73  
Old 02-18-2017, 07:13 AM
popeye68's Avatar
Senior Member
Join Date: Sep 2010
Location: Netherlands
Posts: 173
Received 15 Likes on 9 Posts
Default

Nice!!
 
  #74  
Old 02-18-2017, 11:27 AM
Addicted2boost's Avatar
Veteran Member
Join Date: Mar 2015
Posts: 2,658
Received 1,032 Likes on 812 Posts
Default

I like how fast that thing revs. Sounds really good!
 
  #75  
Old 02-18-2017, 12:47 PM
XJR-99's Avatar
Senior Member
Thread Starter
Join Date: Nov 2011
Location: Europe
Posts: 875
Received 320 Likes on 218 Posts
Default

Originally Posted by Addicted2boost
I like how fast that thing revs. Sounds really good!
Stroke/bore ratio: 1.105 , not really the best for fast revs ........but piston/rod combo is almost 100g lighter than stock.
 

Last edited by XJR-99; 02-19-2017 at 04:11 AM.
  #76  
Old 02-19-2017, 03:35 AM
popeye68's Avatar
Senior Member
Join Date: Sep 2010
Location: Netherlands
Posts: 173
Received 15 Likes on 9 Posts
Default

Take some weight of your flywheel
 
  #77  
Old 02-19-2017, 04:14 AM
XJR-99's Avatar
Senior Member
Thread Starter
Join Date: Nov 2011
Location: Europe
Posts: 875
Received 320 Likes on 218 Posts
Default

Originally Posted by popeye68
Take some weight of your flywheel
Flex plate has been balanced...
 
  #78  
Old 02-19-2017, 05:56 AM
dc4prez's Avatar
Senior Member
Join Date: Jun 2012
Location: Australia Townsville
Posts: 137
Received 48 Likes on 33 Posts
Default

More important Sami - your piston speed is now at 110% - you are lucky they are lighter -
you have quite a few tonnes of energy swinging around at 6,000RPM -
Mine is absolutely screaming -
 
  #79  
Old 02-27-2017, 08:39 AM
XJR-99's Avatar
Senior Member
Thread Starter
Join Date: Nov 2011
Location: Europe
Posts: 875
Received 320 Likes on 218 Posts
Default

Got a bit more knock protection today....
 
Attached Thumbnails My final project: 2016-aem_meth_kit_1.jpg   My final project: 2016-aem_10.jpg  

Last edited by XJR-99; 02-27-2017 at 08:59 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JimC64
US Southern Midwest
22
12-05-2015 12:23 AM
themaestro023
New Member Area - Intro a MUST
8
11-13-2015 10:30 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: My final project: 2016



All times are GMT -5. The time now is 10:12 AM.