Strange valve clearance problem.
#21
01-11-2012 | 04:05 AM
Veteran Member
Joined: Oct 2008
Posts: 4,792
Likes: 1,371
From: Sunny Southport UK
The following users liked this post:
xjrsteve (01-11-2012)
#23
01-11-2012 | 09:04 AM
Veteran Member
Joined: Oct 2008
Posts: 4,792
Likes: 1,371
From: Sunny Southport UK
#24
01-12-2012 | 08:19 AM
Thread Starter
|
Senior Member
Joined: Aug 2011
Posts: 124
Likes: 11
From: Europe
#25
06-30-2016 | 11:52 PM
Member
Joined: Feb 2016
Posts: 56
Likes: 3
From: West Coast
Have same problem
Steve, as you have a spare car/engine, I'd suggest using another cylinder head. The original head can be fixed, but I don't know at what cost, and the other issue is warping, it may need skimming, and a number of valves/seats/guides replacing, not just one. It can get very expensive, quickly!!
To use the spare car's cylinder head we need to know if it's AJ26 (Model year?) and the model year of the project car's engine (AJ27?) Because there is one difference in the two cylinder heads, i.e. the cam position sensors. The 26 has one, the 27 has two, so, you might need to swap an intake camshaft.....
To use the spare car's cylinder head we need to know if it's AJ26 (Model year?) and the model year of the project car's engine (AJ27?) Because there is one difference in the two cylinder heads, i.e. the cam position sensors. The 26 has one, the 27 has two, so, you might need to swap an intake camshaft.....
Omg, this is the same problem I am going with my 2000 Vanden Plas N/A
i took this photo, because I noticed something that seems odd to me..... is this the valve seat I am seeing? this photo was taken from the left side
Thread
Thread Starter
Forum
Replies
Last Post
salP3082
XJ XJ6 / XJR6 ( X300 )
23
09-25-2015 05:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)