Central Locking not working
#1
Central Locking not working
Hi,
I have a 1992 K plate XJ40 and the central locking is not working. I had a blown fuse symbol on the dash and this was traced back to the central locking fuse. The fuse was changed but it was immediately blown again. What could be causing the fuse to blow so quickly and is there anything else that should be looked at for the central locking?
Thanks
I have a 1992 K plate XJ40 and the central locking is not working. I had a blown fuse symbol on the dash and this was traced back to the central locking fuse. The fuse was changed but it was immediately blown again. What could be causing the fuse to blow so quickly and is there anything else that should be looked at for the central locking?
Thanks
#2
Join Date: Feb 2014
Location: Crossroads of America
Posts: 19,581
Received 13,203 Likes
on
6,552 Posts
Hi asharb123,
There is obviously a short in the central locking circuit that will have to be located and resolved.
You can download the wiring schematics at this link:
Jaguar XJ40 Electrical Guide 1992
Cheers,
Don
There is obviously a short in the central locking circuit that will have to be located and resolved.
You can download the wiring schematics at this link:
Jaguar XJ40 Electrical Guide 1992
Cheers,
Don
The following 2 users liked this post by Don B:
93SB (09-10-2022),
MountainMan (09-10-2022)
Thread
Thread Starter
Forum
Replies
Last Post
awg294
XJ6 & XJ12 Series I, II & III
14
04-28-2022 05:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)