Body panel
#2
Join Date: Mar 2008
Location: Pacific Northwest USA
Posts: 24,884
Received 10,941 Likes
on
7,188 Posts
![Default](/forum/images/icons/icon1.gif)
You might find a car in a boneyard with rust free corners that could be cut out. Rust is usually what sends these cars to the boneyard to begin with. Don't get your hopes up. Maybe try David at Everyday XJ?
The usual repair process is to cut out the rusted area and fabricate new metal to weld-in. Not inexpensive.
Hopefully the rust hasn't gone too far. Sometimes it goes all the way down into the firewall. What you see on the exterior is just the tip of the iceberg
Cheers
DD
The usual repair process is to cut out the rusted area and fabricate new metal to weld-in. Not inexpensive.
Hopefully the rust hasn't gone too far. Sometimes it goes all the way down into the firewall. What you see on the exterior is just the tip of the iceberg
Cheers
DD
The following users liked this post:
LnrB (08-20-2024)
#3
The following 2 users liked this post by ruffindustries:
Doug (08-20-2024),
Greg in France (08-21-2024)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)