Series 3 Pre HE Fuel Injector Seals
#1
Series 3 Pre HE Fuel Injector Seals
Hi Folks,
I'm part way through doing cam cover seals and all the associated fun and have a question about the injector seals.
I purchased small seals (EAC2415), however upon pulling the injectors there's no sign of a small seal - only the larger one that sits between the injector and the inlet manifold.
I felt sure I needed these, however it seems not - unless of course I'm missing something (highly likely) - hoping someone knows if I need them or not.
The good news is that the large seals are still very soft - pretty much like new, leading me to believe the injectors likely had a service not long before I purchased the car.
Thanks in advance friends.
Roger
I'm part way through doing cam cover seals and all the associated fun and have a question about the injector seals.
I purchased small seals (EAC2415), however upon pulling the injectors there's no sign of a small seal - only the larger one that sits between the injector and the inlet manifold.
I felt sure I needed these, however it seems not - unless of course I'm missing something (highly likely) - hoping someone knows if I need them or not.
The good news is that the large seals are still very soft - pretty much like new, leading me to believe the injectors likely had a service not long before I purchased the car.
Thanks in advance friends.
Roger
Last edited by rogwit; 01-12-2021 at 02:58 AM. Reason: Addition to post
Thread
Thread Starter
Forum
Replies
Last Post
orangeblossom
XJS ( X27 )
17
10-25-2018 02:08 AM
orangeblossom
XJS ( X27 )
3
06-12-2018 07:09 PM
brgjag
XK8 / XKR ( X100 )
13
11-07-2014 07:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)