Is the alldata subscription worth it for the 96' XJS?
#2
AllData
He replaced my Inboard Rear Calipers, Rotors, pads and E-pads. Diff seals and bearings were replaced, along with Rear Coil Springs, and all (6) Koni Shocks. He replaced the Trans. mount spool bushing, Trans. filter and fluid.
Moving to the front of the car, I had him replace the Sparkplugs, Dist. Cap and Rotor and Wires. Lastly was the Coolant Hoses. I had bought all these parts over the summer, and thought it best to have it all done at once, while in the shop with the hoist.
He chose to drop the complete rear cage, saying he wanted to see what he was doing properly.
When he was finished, I asked him if anything gave him trouble, he replied he had all the info in front of him, and would not have done the work without the AllData program.
The following 2 users liked this post by gregh:
91xjscoupe (11-10-2015),
Lenoat702 (01-17-2013)
#4
#5
Join Date: Mar 2008
Location: Pacific Northwest USA
Posts: 24,919
Received 10,978 Likes
on
7,211 Posts
#7
He replaced my Inboard Rear Calipers, Rotors, pads and E-pads. Diff seals and bearings were replaced, along with Rear Coil Springs, and all (6) Koni Shocks. He replaced the Trans. mount spool bushing, Trans. filter and fluid. Moving to the front of the car, I had him replace the Sparkplugs, Dist. Cap and Rotor and Wires. Lastly was the Coolant Hoses..
Just kidding around.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)