injector spacing for new wire harness
#1
![Default](/forum/images/icons/icon1.gif)
A request for help here. I've a 1992 XJS. I live in Uganda during the winter, and we are now on total lockdown/curfew.
I brought back wire and injector connectors to make a new FI harness during my time here. But, it seems the piece of paper with the distance between the injectors has gone missing.
I would much appreciate if anyone that has access to their HE engine would mind measuring: a) the total length end-to-end of one bank of injectors; b) the spacing between injectors
Cheers
I brought back wire and injector connectors to make a new FI harness during my time here. But, it seems the piece of paper with the distance between the injectors has gone missing.
I would much appreciate if anyone that has access to their HE engine would mind measuring: a) the total length end-to-end of one bank of injectors; b) the spacing between injectors
Cheers
#2
![Default](/forum/images/icons/icon1.gif)
Hello, and greetings from Finland
Took measurement from my -89 V12 XJS
Whole lenght from first injector to last: 55cm (measured from 1st injector boss fwd edge to last injector boss aft edge)
Spacing between injectors 10cm, except 3-4 which is 8cm. (measured from center of injector hose to next one)
Hope this helps
Took measurement from my -89 V12 XJS
Whole lenght from first injector to last: 55cm (measured from 1st injector boss fwd edge to last injector boss aft edge)
Spacing between injectors 10cm, except 3-4 which is 8cm. (measured from center of injector hose to next one)
Hope this helps
#4
The following users liked this post:
Greg in France (05-02-2020)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)