Rebuilding the rear hubs and driveshafts
#1
09-21-2022, 03:01 AM
Rebuilding the rear hubs and driveshafts
Attached is a PDF which sets out more succinctly the steps I took to rebuid my rear axle driveshafts and hubs. This was taken from the post I made about my experience of doing this work, back in late 2019, link here:
https://www.jaguarforums.com/forum/x...ebuild-225834/
This procedure as set out in the PDF applies to all models of Jaguar that use the inboard-braked independent rear axle assembly, not only to XJS models.
https://www.jaguarforums.com/forum/x...ebuild-225834/
This procedure as set out in the PDF applies to all models of Jaguar that use the inboard-braked independent rear axle assembly, not only to XJS models.
The following 13 users liked this post by Greg in France:
Asdrewq (09-30-2022),
AZDoug (11-27-2023),
David84XJ6 (09-21-2022),
Doug (09-21-2022),
EcbJag (09-23-2022),
and 8 others liked this post.
#3
09-21-2022, 08:08 AM
The following 2 users liked this post by GGG:
Grant Francis (09-21-2022),
Greg in France (09-21-2022)
Thread
Thread Starter
Forum
Replies
Last Post
Sean W
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
0
10-25-2015 08:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)