Restoration XJS V12 manual gearbox 1978
#61
The following 2 users liked this post by Barto:
Greg in France (05-06-2017),
Javier Mena (03-17-2017)
#62
Hello, we are finally getting the material from the various suppliers that will supply us with the necessary equipment for the renewal of the engine, clutch and gearbox.
We will continue with the work as it is said here although I do not know if the translation will be the correct one "slowly and with good letter"
We will continue with the work as it is said here although I do not know if the translation will be the correct one "slowly and with good letter"
#63
Join Date: Jul 2012
Location: Walnut Creek, California
Posts: 6,796
Received 2,399 Likes
on
1,880 Posts
#64
We continue the repairs. Today I had time to devote myself to checking the gearbox. It is in very good condition. What was in worse condition were the oil seals on both the primary shaft and the trailing plate. The paper seals of the side covers have also been changed as for that of the selector assembly and the o-rings of the fork shafts. The bearings, gears, synchronizers are in perfect condition.
Last edited by Javier Mena; 05-05-2017 at 04:31 PM.
The following users liked this post:
Greg in France (05-06-2017)
#65
The following users liked this post:
Greg in France (05-06-2017)
#68
The following users liked this post:
Javier Mena (11-12-2018)
#69
The following users liked this post:
Javier Mena (11-12-2018)
#70
The following users liked this post:
Javier Mena (11-12-2018)
Thread
Thread Starter
Forum
Replies
Last Post
philwarner
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
0
02-02-2016 10:54 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)