Steering rack swapover
#22
#25
![Default](/forum/images/icons/icon1.gif)
So, Im out of the shop today. Last night I found that the tabs on the subframes where the mounting bolts run through were all really reamed out and elongated.
So we got out the MiG and welded up some thick reinforcing washers. We also replaced both lower shock mounts. They have two mounting bolts, and an ear that slips over the lower ball joint stud. That ear on both my mounts was broken off.
For the first time ever, there are no clunks in the front end when going over potholes and manhole covers!
So we got out the MiG and welded up some thick reinforcing washers. We also replaced both lower shock mounts. They have two mounting bolts, and an ear that slips over the lower ball joint stud. That ear on both my mounts was broken off.
For the first time ever, there are no clunks in the front end when going over potholes and manhole covers!
The following users liked this post:
Greg in France (11-07-2019)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)