Where to buy wiper arms?
#1
Where to buy wiper arms?
My 1986 LHD needs new - or used - wiper arms.
Found a used replacement wiper motor, which unfortunately was lacking the arms, as well as the nuts below the arms.
Have searched the internet for a few days now (eBay, Martin Robey, SNG, David Manners etc) without any luck. Don't think anyone makes them anymore.
So, does anyone know where they can be found, or are there wiper arms from any other car that can be used?
Apologies if this has been answered before in this forum, and if so, just post the link again, please.
Any help appreciated.
Cheers
//Ronnie
Found a used replacement wiper motor, which unfortunately was lacking the arms, as well as the nuts below the arms.
Have searched the internet for a few days now (eBay, Martin Robey, SNG, David Manners etc) without any luck. Don't think anyone makes them anymore.
So, does anyone know where they can be found, or are there wiper arms from any other car that can be used?
Apologies if this has been answered before in this forum, and if so, just post the link again, please.
Any help appreciated.
Cheers
//Ronnie
#2
#3
#4
#5
#7
Just listed my wiper arms for sale. Wasn't sure if posting it here was allowed per forum rules, if not, please let me know where and I will move it to the appropriate place.
Jaguar XJS XJ6 XJ12 Wiper Arms DAC6150 DAC6149 DAC11037 DAC11039 DAC11038
Jaguar XJS XJ6 XJ12 Wiper Arms DAC6150 DAC6149 DAC11037 DAC11039 DAC11038
Trending Topics
#8
Hi agin Benj628
Excellent, I'll take them. However, it says: Does not post to Norway. If i click "Buy it now", will you quote me postage, please?
Sincerely
//Ronnie
And also; To avoid lots of extra "red tape" & Norwegian taxes, please label the package with "Used car parts", total value "USD 15" - we've got some strict rules in this country.....
Excellent, I'll take them. However, it says: Does not post to Norway. If i click "Buy it now", will you quote me postage, please?
Sincerely
//Ronnie
And also; To avoid lots of extra "red tape" & Norwegian taxes, please label the package with "Used car parts", total value "USD 15" - we've got some strict rules in this country.....
#9
Oh, yes, I didn't realize you were not in the US. I'll gladly ship to you there. You should be able to purchase through eBay and I will adjust the shipping before sending you the official invoice. I'm not sure what the actual shipping will be so I will just quote you 15 USD and I will pay whatever difference myself. And yes I'm familiar with the absurd Customs requirements so I will gladly label it appropriately for you :-)
#11
A huge thank you! :)
Oh, yes, I didn't realize you were not in the US. I'll gladly ship to you there. You should be able to purchase through eBay and I will adjust the shipping before sending you the official invoice. I'm not sure what the actual shipping will be so I will just quote you 15 USD and I will pay whatever difference myself. And yes I'm familiar with the absurd Customs requirements so I will gladly label it appropriately for you :-)
Just want to say thank you for those perfect looking wiper arms. Now my car looks much better
Sincerely
//Ronnie
#13
#15
Y
Yes, you can, very easily. Best to put the thing in a vice so the pre-bend straight is held firmly.
In fact, as OEM, even when the arm's location on the splines makes the blade end nearest the spline as low as possible, the other end of the blade still is not flat. If you bend the arm a bit further at the OEM bend spot, then the blades will lie dead flat along the bottom screen seal. The outer end will still overlap the side seal a touch, but it does not seem to harm the blade.
Yes, you can, very easily. Best to put the thing in a vice so the pre-bend straight is held firmly.
In fact, as OEM, even when the arm's location on the splines makes the blade end nearest the spline as low as possible, the other end of the blade still is not flat. If you bend the arm a bit further at the OEM bend spot, then the blades will lie dead flat along the bottom screen seal. The outer end will still overlap the side seal a touch, but it does not seem to harm the blade.