XK Remote Top demo video !
#141
Did I leave anyone out ?
I believe everyone on the waiting list has now been notified and has received instructions on how to order their Remote Top kit.
If I missed you, please let me know!
For those who have not ordered yet, please note that you have been offered special introductory pricing for being an early supporter of this project. This special pricing will expire at the end of May.
Thanks to all of you who have helped make this product a great success!
If I missed you, please let me know!
For those who have not ordered yet, please note that you have been offered special introductory pricing for being an early supporter of this project. This special pricing will expire at the end of May.
Thanks to all of you who have helped make this product a great success!
#142
Thanks to you, Steve, for developing such a great, reliable and functional product for our verts. I actually had another XK owner follow me into a parking lot last week to ask me how I got my back windows to come up with the top down. When I showed him how they worked and the remote top, I thought he was going to pass out. I extracted your contact deets and website URL from my i-Phone and gave it to him.
#143
Thanks to you, Steve, for developing such a great, reliable and functional product for our verts. I actually had another XK owner follow me into a parking lot last week to ask me how I got my back windows to come up with the top down. When I showed him how they worked and the remote top, I thought he was going to pass out. I extracted your contact deets and website URL from my i-Phone and gave it to him.
Well over 1000 hours went into perfecting this product. It is very gratifying to see it overwhelmingly being appreciated and enjoyed.
Also a reminder: For those on the waiting list who have not ordered yet, please note that you have been offered special introductory pricing for being a supporter of this project. This special pricing has been extended to June 8 using the link you were emailed. Please place your order before the price increases. Units are in stock for immediate shipment now.
Last edited by WhiteXKR; 06-03-2014 at 11:46 AM.
#144
Remote Top Now available, in stock
The waiting list has ended and the Remote Top/One touch//Rear window control module can now be ordered directly on my website at: NEW!! '06 -'15, XK / XKR (X150) Convertible Top Remote Control - TheJagWrangler .
Thanks again to all of my Beta testers and early supporters of this product !
Thanks again to all of my Beta testers and early supporters of this product !
The following users liked this post:
sherbercars (06-25-2014)
#145
Steve,
Just want to say thanks from another happy customer with the unit now installed and working perfectly first time.
I want to echo what the others are saying here, the kit and instructions are of very high quality, not hard to install, and works perfectly.
I'm very much looking forward to your other future enhancements for the newer shape XK(R)s.
A better bluetooth module (i.e. one that is properly compatible with samsung/android phones phonebooks and also supports streaming audio) would be very much appreciated!!!
Neil.
Just want to say thanks from another happy customer with the unit now installed and working perfectly first time.
I want to echo what the others are saying here, the kit and instructions are of very high quality, not hard to install, and works perfectly.
I'm very much looking forward to your other future enhancements for the newer shape XK(R)s.
A better bluetooth module (i.e. one that is properly compatible with samsung/android phones phonebooks and also supports streaming audio) would be very much appreciated!!!
Neil.
The following users liked this post:
WhiteXKR (06-07-2014)
#146
One of my customers very kindly provided a German translation from English for the Remote Top Installation and Operation manual. He then installed it successfully using the German instructions. The German version will go on my website shortly.
In the meantime, if anyone wants a copy, let me know.
In the meantime, if anyone wants a copy, let me know.
Last edited by WhiteXKR; 06-21-2014 at 08:22 AM.
#147
#148
#149
@ WhiteXKR,
today my remote top unit arrived. Customs in Germany delayed the shipment because of custom taxes which had to be payed before clearance for shipment to me. So the cost in Germany is raised by additional 65€. Nevertheless I'm eager to install the unit and I will immediately post my experiences with implementing the unit into my XKR.
today my remote top unit arrived. Customs in Germany delayed the shipment because of custom taxes which had to be payed before clearance for shipment to me. So the cost in Germany is raised by additional 65€. Nevertheless I'm eager to install the unit and I will immediately post my experiences with implementing the unit into my XKR.
#150
@ WhiteXKR,
today my remote top unit arrived. Customs in Germany delayed the shipment because of custom taxes which had to be payed before clearance for shipment to me. So the cost in Germany is raised by additional 65€. Nevertheless I'm eager to install the unit and I will immediately post my experiences with implementing the unit into my XKR.
today my remote top unit arrived. Customs in Germany delayed the shipment because of custom taxes which had to be payed before clearance for shipment to me. So the cost in Germany is raised by additional 65€. Nevertheless I'm eager to install the unit and I will immediately post my experiences with implementing the unit into my XKR.
Please contact me on my website Contact Us - TheJagWrangler if you have any questions or run into any issues. It is important to me that everyone has a successful installation.
#151
@ WhiteXKR,
Today I installed the remote unit. With the right tools, a piece of cake. The perfect description makes the installing a joy and everything works fine. The checking procedures which have to be followed to make sure everything is connected as it is planned, certifies the correct installment. So I'm a very happy XKR-Driver that can show of and enjoy opening the top without getting a cramp from clinging to a button.
Great kit WhiteXKR and respect for the development of it. One wonders why Jaguar themselves can't come up with a solution like that!
I can advise all Convertible-drivers to do this installing themselves. No problem at all.
Today I installed the remote unit. With the right tools, a piece of cake. The perfect description makes the installing a joy and everything works fine. The checking procedures which have to be followed to make sure everything is connected as it is planned, certifies the correct installment. So I'm a very happy XKR-Driver that can show of and enjoy opening the top without getting a cramp from clinging to a button.
Great kit WhiteXKR and respect for the development of it. One wonders why Jaguar themselves can't come up with a solution like that!
I can advise all Convertible-drivers to do this installing themselves. No problem at all.
#153
Another Satisfied Customer!
I finally got around to installing Steve's kit since my wife abandoned me this weekend to go to her annual reunion with her college sorority sisters. First thing I did was to print the installation instructions - I was overwhelmed that they were 39 pages long! What did I get myself into??? My fears were unfounded.
My "Thanks" to Steve for a superb product with well-written instructions with photos. I am not a mechanic, but have lots of experience assembling toys for my grandkids so I figured I'd give it a shot. Bottom line is that everything works and I can't believe I did it all by myself!
If I can do it, anyone who knows which end of the screwdriver goes into the screw can do it. All you need is patience - and not too much arthritis!
I want to give you my thoughts about the installation that are not covered in Steve's instructions.
1. Make sure you use the latest version of the instructions, which (as of today) is Version 1.6. I mention this because I inadvertently used Version 1.5 and thought I had a problem but actually did not after emailing Steve.
2. Do the work in your garage on a cool day, and make sure to have a fan to blow air into the car while you're working. Keep a cold drink handy - you'll need it.
3. Give yourself as much room to work as possible in the back seat. After you use the electrical switches on the doors to move both seats/backs as far forward and up as possible, pull the chrome handle on the top of each seat back to make them flip forward. Remove the seatbelts from the loop holders on the seat backs to make it easier to get in and out.
4. Make it as as comfortable as possible in the back seat. After you remove the seats the surfaces are hard and uncomfortable so use a foam stadium seat or other cushioning. It's cramped back there and you'll be in some awkward positions at times, so some padding will help.
4. Put the small parts that M removed (bolts, nuts, etc.) in separate ziplock bags and label each bag to identify what they're used for to facilitate re-installation. Note: I didn't do this, and had all the small parts in the cup holder but I wasted time sorting through everything when putting it back together.
5. Take your time, follow the instructions step-by-step, and make sure that you tighten each posi-tap connector securely.
I actually had fun doing the installation, and am quite proud of my work! If I can do it, so can you!
THANKS AGAIN, STEVE!
Stuart
P.S. Since I had to remove the back seats, I took that opportunity to thoroughly clean and condition them. Although they didn't look bad before I started, I was surprised that my white rags got so filthy. There's more dirt on those seats than you think!
My "Thanks" to Steve for a superb product with well-written instructions with photos. I am not a mechanic, but have lots of experience assembling toys for my grandkids so I figured I'd give it a shot. Bottom line is that everything works and I can't believe I did it all by myself!
If I can do it, anyone who knows which end of the screwdriver goes into the screw can do it. All you need is patience - and not too much arthritis!
I want to give you my thoughts about the installation that are not covered in Steve's instructions.
1. Make sure you use the latest version of the instructions, which (as of today) is Version 1.6. I mention this because I inadvertently used Version 1.5 and thought I had a problem but actually did not after emailing Steve.
2. Do the work in your garage on a cool day, and make sure to have a fan to blow air into the car while you're working. Keep a cold drink handy - you'll need it.
3. Give yourself as much room to work as possible in the back seat. After you use the electrical switches on the doors to move both seats/backs as far forward and up as possible, pull the chrome handle on the top of each seat back to make them flip forward. Remove the seatbelts from the loop holders on the seat backs to make it easier to get in and out.
4. Make it as as comfortable as possible in the back seat. After you remove the seats the surfaces are hard and uncomfortable so use a foam stadium seat or other cushioning. It's cramped back there and you'll be in some awkward positions at times, so some padding will help.
4. Put the small parts that M removed (bolts, nuts, etc.) in separate ziplock bags and label each bag to identify what they're used for to facilitate re-installation. Note: I didn't do this, and had all the small parts in the cup holder but I wasted time sorting through everything when putting it back together.
5. Take your time, follow the instructions step-by-step, and make sure that you tighten each posi-tap connector securely.
I actually had fun doing the installation, and am quite proud of my work! If I can do it, so can you!
THANKS AGAIN, STEVE!
Stuart
P.S. Since I had to remove the back seats, I took that opportunity to thoroughly clean and condition them. Although they didn't look bad before I started, I was surprised that my white rags got so filthy. There's more dirt on those seats than you think!
Last edited by Stuart S; 07-22-2014 at 08:36 PM. Reason: Added P.S.
#154
Now comes the fun part. It is a real kick to lower and raise the top from outside the car. Also no longer having to hold the button to put the top up and down is a big plus as is the ability to control the rear windows as you wish.
Steve is truly a genius when it comes to xks and is a super nice guy to boot.
Steve is truly a genius when it comes to xks and is a super nice guy to boot.
The following 2 users liked this post by ralphwg:
sherbercars (07-21-2014),
WhiteXKR (07-22-2014)
#155
Now comes the fun part. It is a real kick to lower and raise the top from outside the car. Also no longer having to hold the button to put the top up and down is a big plus as is the ability to control the rear windows as you wish.
Steve is truly a genius when it comes to xks and is a super nice guy to boot.
Steve is truly a genius when it comes to xks and is a super nice guy to boot.
The following users liked this post:
mcdutch (07-21-2014)
#156
Stuart, Ralph, mcdutch...thank you all for posting your recent experiences with the Remote Top/One Touch/Rear Window control module.
Developing this product has been a creative endeavor for me and I am extremely happy to see my efforts enjoyed by others!!
I know there are a number of folks considering the upgrade but would prefer not to do it themselves.
-If you are in driving distance of the DC Metro area, please contact me..I can install it for you myself.
-If you are in the NYC tri-state area, I have an installer who has experience with it.
-If you are in the LA area, I have a free-lance experienced installer who will be happy to come to you.
In other areas, contact me at Contact Us - TheJagWrangler and I will attempt to find someone to help you.
Thanks!
Steve
Developing this product has been a creative endeavor for me and I am extremely happy to see my efforts enjoyed by others!!
I know there are a number of folks considering the upgrade but would prefer not to do it themselves.
-If you are in driving distance of the DC Metro area, please contact me..I can install it for you myself.
-If you are in the NYC tri-state area, I have an installer who has experience with it.
-If you are in the LA area, I have a free-lance experienced installer who will be happy to come to you.
In other areas, contact me at Contact Us - TheJagWrangler and I will attempt to find someone to help you.
Thanks!
Steve
Last edited by WhiteXKR; 07-22-2014 at 10:29 AM.
#157
I finally got around to installing Steve's kit since my wife abandoned me this weekend to go to her annual reunion with her college sorority sisters. First thing I did was to print the installation instructions - I was overwhelmed that they were 39 pages long! What did I get myself into??? My fears were unfounded.
My "Thanks" to Steve for a superb product with well-written instructions with photos. I am not a mechanic, but have lots of experience assembling toys for my grandkids so I figured I'd give it a shot. Bottom line is that everything works and I can't believe I did it all by myself!
If I can do it, anyone who knows which end of the screwdriver goes into the screw can do it. All you need is patience - and not too much arthritis!
I want to give you my thoughts about the installation that are not covered in Steve's instructions.
1. Make sure you use the latest version of the instructions, which (as of today) is Version 1.6. I mention this because I inadvertently used Version 1.5 and thought I had a problem but actually did not after emailing Steve.
2. Do the work in your garage on a cool day, and make sure to have a fan to blow air into the car while you're working. Keep a cold drink handy - you'll need it.
3. Give yourself as much room to work as possible in the back seat. After you use the electrical switches on the doors to move both seats/backs as far forward and up as possible, pull the chrome handle on the top of each seat back to make them flip forward. Remove the seatbelts from the loop holders on the seat backs to make it easier to get in and out.
4. Make it as as comfortable as possible in the back seat. After you remove the seats the surfaces are hard and uncomfortable so use a foam stadium seat or other cushioning. It's cramped back there and you'll be in some awkward positions at times, so some padding will help.
4. Put the small parts that you removed (bolts, nuts, etc.) in separate ziplock bags and label each bag to identify what they're used for to facilitate re-installation. Note: I didn't do this, and had all the small parts in the cup holder but I wasted time sorting through everything when putting it back together.
5. Take your time, follow the instructions step-by-step, and make sure that you tighten each posi-tap connector securely.
I actually had fun doing the installation, and am quite proud of my work! If I can do it, so can you!
THANKS AGAIN, STEVE!
Stuart
My "Thanks" to Steve for a superb product with well-written instructions with photos. I am not a mechanic, but have lots of experience assembling toys for my grandkids so I figured I'd give it a shot. Bottom line is that everything works and I can't believe I did it all by myself!
If I can do it, anyone who knows which end of the screwdriver goes into the screw can do it. All you need is patience - and not too much arthritis!
I want to give you my thoughts about the installation that are not covered in Steve's instructions.
1. Make sure you use the latest version of the instructions, which (as of today) is Version 1.6. I mention this because I inadvertently used Version 1.5 and thought I had a problem but actually did not after emailing Steve.
2. Do the work in your garage on a cool day, and make sure to have a fan to blow air into the car while you're working. Keep a cold drink handy - you'll need it.
3. Give yourself as much room to work as possible in the back seat. After you use the electrical switches on the doors to move both seats/backs as far forward and up as possible, pull the chrome handle on the top of each seat back to make them flip forward. Remove the seatbelts from the loop holders on the seat backs to make it easier to get in and out.
4. Make it as as comfortable as possible in the back seat. After you remove the seats the surfaces are hard and uncomfortable so use a foam stadium seat or other cushioning. It's cramped back there and you'll be in some awkward positions at times, so some padding will help.
4. Put the small parts that you removed (bolts, nuts, etc.) in separate ziplock bags and label each bag to identify what they're used for to facilitate re-installation. Note: I didn't do this, and had all the small parts in the cup holder but I wasted time sorting through everything when putting it back together.
5. Take your time, follow the instructions step-by-step, and make sure that you tighten each posi-tap connector securely.
I actually had fun doing the installation, and am quite proud of my work! If I can do it, so can you!
THANKS AGAIN, STEVE!
Stuart
#158
I used a great little 27 LED flashlight that I bought from my local Harbor Freight. Here's the link if you don't have a retail store near you: Portable Worklight & Flashlight - 27 LED Light Flashlight
What make it great is that it has 3 LEDs in the front that function as a conventional flashlight and 24 LEDs on the top that alternately function as a worklight. Plus it has a very handy folding adjustable hook embedded on the bottom and a magnetic base. Can't beat it for the price! Only $3.49 on sale (reg. $5.99). I bought several to keep in my cars and at home. Highly recommended!
I tried to make the pictures smaller but couldn't figure out how to do it.
Stuart
What make it great is that it has 3 LEDs in the front that function as a conventional flashlight and 24 LEDs on the top that alternately function as a worklight. Plus it has a very handy folding adjustable hook embedded on the bottom and a magnetic base. Can't beat it for the price! Only $3.49 on sale (reg. $5.99). I bought several to keep in my cars and at home. Highly recommended!
I tried to make the pictures smaller but couldn't figure out how to do it.
Stuart
Last edited by Stuart S; 07-22-2014 at 09:37 PM.
The following users liked this post:
richzak (08-08-2014)
#159
Delighted with my installation. The auto up/down is great. Perhaps some of you may find this experience I had today useful.
Drove the car out of the garage and it said remote battery low. I stopped the engine and went int the house to replace the battery. When I came back out to the car the top was down. I thought perhaps I'd touched the buttons when changing the battery. Drove down the road and it started to rain so I slowed for a junction and pressed the top up button. Nothing happened so had visions of a car full of water ! I managed to pull over and tried again. The top started to close and then stopped half way. Rumage for the manual to remind myself how to raise it manually, find the key and go to the boot to use the key. The boot wasn't closed properly! It must have opened when I was changing the battery. I closed the boot and the roof closed, although it didn't put the windows up. They went up ok manually and I have since cycled the roof when I got the car back in the garage and all is OK. Moral being if it won't close properly check the boot is closed !
Drove the car out of the garage and it said remote battery low. I stopped the engine and went int the house to replace the battery. When I came back out to the car the top was down. I thought perhaps I'd touched the buttons when changing the battery. Drove down the road and it started to rain so I slowed for a junction and pressed the top up button. Nothing happened so had visions of a car full of water ! I managed to pull over and tried again. The top started to close and then stopped half way. Rumage for the manual to remind myself how to raise it manually, find the key and go to the boot to use the key. The boot wasn't closed properly! It must have opened when I was changing the battery. I closed the boot and the roof closed, although it didn't put the windows up. They went up ok manually and I have since cycled the roof when I got the car back in the garage and all is OK. Moral being if it won't close properly check the boot is closed !
#160