https://cimg2.ibsrv.net/gimg/www.jag...be35c07f79.jpg
This is great Bob, but how do i get it to do online banking?

looking good.
Unless you like bitcoins it can't be done.

I just love those RTFM moments....only in North America...sigh! 🤤

Bob it's an amazing piece of kit, can't thank you enough for your efforts. There's a drink on its way

👍

don't forget to place the lid

completely sorted my friend
https://cimg6.ibsrv.net/gimg/www.jag...04aa9e14c0.jpg

Hi Bob
I've recently acquired a new to me 2014 XK Dynamic R and would really like to obtain one of your display units having read through this thread (when you are in a position to put together more kits obviously). Please add me to your waiting list. Thanks. Keith

Hi Bob
i think there are some guys on the UK forum who might be wanting this also, im going to see if I can get some numbers for you

Hi wsn03. That's where I found the link to this thread. Thanks.

I have parts on stock for only 2 additional units.
I mainly lack some more ESP32 boards.
the PCB's I have 5, and some more green "old type" (round 1) PCB's.
I've got 9 displays on stock.

Edit: I have 1 waiting member in my private messaging box...

Hi Bob
including KMVW, and i think the guy who messaged you, there are a total of 3 UK guys who want your kit.
Is it possible to help them out?

That should be no problem,
but now this thread is restarted, more interested parties are to be expected.

well you'd think so Bob, even people like me who really weren't keen on it as a solution are very very happy with the final results- it finishes the car off beautifully

Hi Bob yes its me scjordan1969 in uk who private messaged you. Many thanks to wsn03 for restarting the thread, glad you can help at some point thanks

Wiring diagram
 

Hi Bob,

I want to build this great project myself because I like the concept, only I don’t have a car like this.
Would it be possible to post a wiring diagram about the latest version because what I found on your website I don’t really understand?
In the program I see that:
- the photo resistor is connected to GPIO36 but to 34 in the drawing
- LED for GPIO4 but in drawing 19.
- etc.
So I don't know what's right.
Thank you very much.

Zoszabo,

download and unzip this file:
https://x150.bobhome.nl/scheme.zip
it contains the eagle schematics and board images and a pinout image of the ESP32 Devkit V1 board.

Thanks
 

Hi Bob,

many thanks for your fast response!

:icon_imnotworthy:

+1 Interested. I will PM you #Cabrio Bob

Also interested…
Kind regards
HA

final, final round
 

Ok here it goes.....
I ordered parts for an additional 9 pieces. When those are reserved, no more units will be made by me.
Parts are estimated to arrive here around the 4th of March.
Since July 2021 we have to pay import duties, so the price of a unit goes up a little.
If you still want one please reply below.
Please note: people who previously showed interest have priority.

final, final round details:
- I will only supply the soldered electronics, the USB cable and the button cap.
- The 3D print you can have it printed yourself using MJF or SLS Nylon technique and (have it) painted or stained.
- For example, select a 3D print service from this list (and download the 3D print zip file from my website).
- The ELM327 "Vgate iCar Pro 4.0 bluetooth" you should order yourself (source 1 (UK) source 2 (US) source 3 (DE) source 4 (Ali))
- Ordering a different type of ELM327 device is not recommended.
- The cig power socket you should order yourself, I got these or these. (or get an other low profile one)

I am asking €63.50 for the electronics-only device, excl. shipping, excl. paypal fees.

Shipment standard with track and trace:
to the UK is €18.50, to the USA is €25.55

Shipment with Proof of sending and receipt (signature), Track & Trace, insured up to €100:
to the UK is €21.00, to the USA is €28.05

It seems that shipping to the USA has become cheaper.

Thats great Bob thanks. I was already on the list so please advise how, when and where do we pay you. Also could you let me have a link to your website. Thanks Keith.

Website link is in my signature

So it is - and payment details please Bob.

Hi bob, put me down for one thankyou 👍👍

Brilliant Bob, I'll nudge the guys on the other site now

Hi Bob,
could you add me to the order list?
many thanks

Payment is not due yet, I expect to receive parts in 4 weeks or so.

Hi Bob!

I managed to put together your project and have tested it with a UNO + Bluetooth module so far.
I ordered the Vgate iCar Pro ELM 327 OBD2 Scanner BT 4.0 (which you recommended).
I tried it today but unfortunately after the connection, I keep getting the ELM STOPPED error.
I see this:

*** ELM327 ***
Clearing input serial buffer
Sending the following command/query: AT D
Received char: A
Received char: T
Received char:
Received char: D
Received char: \r
Received char: \r
Received char: O
Received char: K
Received char: \r
Received char: \r
Received char: >
Delimiter found
All chars received: ATDOK
Clearing input serial buffer
Sending the following command/query: AT Z
Received char: A
Received char: T
Received char:
Received char: Z
Received char: \r
Received char: \r
Received char: \r
Received char: E
Received char: L
Received char: M
Received char: 3
Received char: 2
Received char: 7
Received char:
Received char: v
All chars received: ATZELM327v
Timeout detected with overflow of 47ms
Clearing input serial buffer
Sending the following command/query: AT E0
Received char: A
Received char: T
Received char:
Received char: E
Received char: 0
Received char: \r
Received char: O
Received char: K
Received char: \r
Received char: \r
Received char: >
Delimiter found
All chars received: ATE0OK
Clearing input serial buffer
Sending the following command/query: AT S0
Received char: O
Received char: K
Received char: \r
Received char: \r
Received char: >
Delimiter found
All chars received: OK
Clearing input serial buffer
Sending the following command/query: AT AL
Received char: O
Received char: K
Received char: \r
Received char: \r
Received char: >
Delimiter found
All chars received: OK
Clearing input serial buffer
Sending the following command/query: AT ST 00
Received char: O
Received char: K
Received char: \r
Received char: \r
Received char: >
Delimiter found
All chars received: OK
Clearing input serial buffer
Sending the following command/query: AT TP A0
Received char: O
Received char: K
Received char: \r
Received char: \r
Received char: >
Delimiter found
All chars received: OK
showCoolant
Service: 1
PID: 5
Normal length query detected
Query string: 0105
Clearing input serial buffer
Sending the following command/query: 0105
Received char: S
Received char: E
Received char: A
Received char: R
Received char: C
Received char: H
Received char: I
Received char: N
Received char: G
Received char: .
Received char: .
Received char: .
Received char: \r
All chars received: SEARCHING
Timeout detected with overflow of 0ms
CoolantC: -1.00
showVolt
Service: 1
PID: 66
Normal length query detected
Query string: 0142
Clearing input serial buffer
Sending the following command/query: 0142
Received char: S
Received char: T
Received char: O
Received char: P
Received char: P
Received char: E
Received char: D
Received char: \r
Received char: \r
Received char: >
Delimiter found
All chars received: STOPPED
ELM responded with errror "STOPPED"
Expected response header: 4142
Response not detected
VoltA: 0.00
ELM Error: 6

Do you have any idea what the problem might be?
Thank you very much for your help!

Hi all,

if someone is still trying to create the project themselves, be sure to use version 2.6.4. For 3.0.1, you receive this error message:


https://cimg7.ibsrv.net/gimg/www.jag...f4cbe01cba.jpg

Final, final round order list:
- KMVW
- scjordan1969
- 427MikeB

6 pieces left

My previous post () is still valid:
If you still want one please reply below.
Please note: people who previously showed interest have priority.

zoszabo72p,
it looks like you already solved your problem?
The version 3.0.1 you mention must be the ELMduino library.
I haven't tried that version yet.

Initially I started with an Arduino Nano, but changed over to an esp32 devkit v1.
My code is adapted to that.

Since you're running an Arduino UNO you might expect problems with the SSD1283A library (link to arduino forum)

Hi Bob,

Unfortunately, this has not yet been resolved.

The PowerBroker2 ELMduino 3.0.1 library can be used if 'if (myELM327.status == ELM_SUCCESS)' is replaced by 'if (myELM327.nb_rx_state == ELM_SUCCESS)'.

I also use ESP32 Devkit v1. It also communicates nicely with the Vgate iCar Pro ELM327 ODB2 scanner.

The problem is that all values are 0 or -1 when I try to test in the car.
On the phone, all the data comes nicely in the Torque app, but the Arduino doesn’t get any data.

I’m still trying, but I don’t really have an idea what the problem might be.


https://cimg2.ibsrv.net/gimg/www.jag...65d4f18782.jpg

in your profile I see you own a Mazda 6.
This might help:
Find out which OBD protocol your car uses, and set the correct one:
See here:
https://github.com/PowerBroker2/ELMd...ment-616686169

Hi Bob,
add me to the list

wj

I'd go for one of these temperature displays also?

Am I too late...??

Ta in advance,

Iain .

legacy4cam,
you're not too late.
but others who were interested before do not respond.

Final, final round updated order list:
- KMVW
- scjordan1969
- 427MikeB
- wymjym
- legacy4cam

To any fence sitters out there, this unit that Bob has created is really very neat and works with the interior very well. It's great for the peace of mind. Mine has performed flawlessly since I got it. I put the supplied board in the printed holder I had made and plugged it all in. It worked without fuss right immediately and has always worked on a car that's only driven on occasion. It's a 5 star buy.

An update,
the parts were delivered early,
I will be able to ship out the 5 units the coming weekend.

Hi there what was the upshot in the end with the rpms can it pick them up?

I’d like to use something like this with rpm based 12v triggers for valve based exhausts - so for arguments sake from 2500rpm to 4000rpm enable the 12v trigger.. how hard would this be?

many thanks and keep up the good work

I realize I am too late for the ashtray device. I was and am still interested but got busy and forgot to order. Let me know if there is another opportunity, sorry about that.
Todd

RPM has never been a problem,
and your idea is easily implemented with a ,
use this kind of sketch,
add to the header to which pin the relay is connected (in this example it is 3):

in Setup, add the following code:

in the loop, add the following: