Supercharger oil change.

Reply Subscribe

Thread Tools

Search this Thread

02-26-2013, 04:22 PM

muncher

Senior Member

Thread Starter

Join Date: Mar 2012

Location: Tauranga New Zealand

Posts: 200

Likes: 47

Received 28 Likes on 22 Posts

Supercharger oil change.

I recently changed the engine and trans oils/filters and want to change the supercharger oil. Has anyone done this? If yes could you advise how to do it and also the type and amount of oil to use.
Thanks guys.

Reply Like

02-26-2013, 05:04 PM

shaune

Senior Member

Join Date: Oct 2009

Location: Niagara Region, ON Canada

Posts: 328

Likes: 50

Received 92 Likes on 63 Posts

Hello, the SC is Eaton's M112 model - same as used in Mustangs.

I believe you will need 2 bottles of SC fluid which can be purchased at GM dealer (part # below)

Here is a link to the procedure using the same Eaton SC but in a Mustang. Same procedures apply:

How To Change Supercharger Oil In 03-04 Cobras - Mustang Evolution

Attached Thumbnails

Reply Like

The following users liked this post:

Mike V (02-27-2013)

02-26-2013, 09:16 PM

Vector

Join Date: Apr 2009

Location: Central Florida

Posts: 1,683

Likes: 70

Received 448 Likes on 333 Posts

https://www.jaguarforums.com/forum/x...e-notes-57136/
Vector

Reply Like

02-27-2013, 03:55 PM

muncher

Senior Member

Thread Starter

Join Date: Mar 2012

Location: Tauranga New Zealand

Posts: 200

Likes: 47

Received 28 Likes on 22 Posts

Thanks for the info guys. Can i just double check one thing. I take it the oil level goes up to the drain plug. Cheers.

Reply Like

02-27-2013, 04:07 PM

shaune

Senior Member

Join Date: Oct 2009

Location: Niagara Region, ON Canada

Posts: 328

Likes: 50

Received 92 Likes on 63 Posts

Quote:

Originally Posted by muncher

Thanks for the info guys. Can i just double check one thing. I take it the oil level goes up to the drain plug. Cheers.

8oz is what the factory calls for so as long as you use two 4oz bottles of the fluid pictured above you will be ok. If it pours out before then just wait til it stops, and screw the filler cap back on.

Reply Like