XK chin spoiler
#1
#2
#3
#4
#5
#6
#7
![Default](/forum/images/icons/icon1.gif)
It was standard on my Dynamic R which would be a US 2015 MY.
I took mine off though as speedbumps and steep inclines had to be negotiated at VERY slow speed, I wasn't careful enough so caught it a few times.
Also it wouldn't clear my rhino ramps so removed mine.
My intention is to refit once hydro dipped in carbon effect transfer, will also have my side skirts, bonnet vents and mirror covers done in the same.
The one in the pics seems to be loose as there shouldn't be such a visible gap between the centre and side pieces.
I do know they are freakin expensive to buy new
I took mine off though as speedbumps and steep inclines had to be negotiated at VERY slow speed, I wasn't careful enough so caught it a few times.
Also it wouldn't clear my rhino ramps so removed mine.
My intention is to refit once hydro dipped in carbon effect transfer, will also have my side skirts, bonnet vents and mirror covers done in the same.
The one in the pics seems to be loose as there shouldn't be such a visible gap between the centre and side pieces.
I do know they are freakin expensive to buy new
![Frown](https://www.jaguarforums.com/forum/images/smilies/frown.gif)
Trending Topics
#8
#9
#10
#11
![Default](/forum/images/icons/icon1.gif)
MartyUK,
By "fusing" I meant that we doweled together the three pieces, filled with bondo, and then painted. This time when we put it on last week, we left it in 3 pieces, where they overlap just as in the OEM one because any time I even lightly scraped the bottom of the splitter, the flexing of the splitter would cause small cracks in the bondo, and I got tired of having my body shop repair and paint it. Hopefully, I'll be more careful and the fact that they're not joined will result in less little cracks that need to be touched up or repainted and filled.
By "fusing" I meant that we doweled together the three pieces, filled with bondo, and then painted. This time when we put it on last week, we left it in 3 pieces, where they overlap just as in the OEM one because any time I even lightly scraped the bottom of the splitter, the flexing of the splitter would cause small cracks in the bondo, and I got tired of having my body shop repair and paint it. Hopefully, I'll be more careful and the fact that they're not joined will result in less little cracks that need to be touched up or repainted and filled.
#12
Join Date: Jan 2015
Location: Naperville, Illinois USA
Posts: 4,649
Received 1,975 Likes
on
1,326 Posts
![Default](/forum/images/icons/icon1.gif)
Don’t recall where I bought them, but it was this model:
https://www.jegs.com/i/Race+Ramps/10...yABEgInYPD_BwE
The following users liked this post:
JackJohn (08-27-2020)
#14
![Default](/forum/images/icons/icon1.gif)
Pics taken today...just for you...hey that's what forums are for
![](https://cimg6.ibsrv.net/gimg/www.jaguarforums.com-vbulletin/2000x971/screenshot_20200827_164420_gallery_ced5e8f96c0a642a1ab45a03ae40b56d7d273cf1.jpg)
![](https://cimg0.ibsrv.net/gimg/www.jaguarforums.com-vbulletin/2000x971/screenshot_20200827_164357_gallery_fe366f9951a8cfcec7ebb42bea8c7ee78cbdcfbb.jpg)
Last edited by MarkyUK; 08-27-2020 at 11:00 AM.
The following users liked this post:
JackJohn (08-27-2020)
#15
Thread
Thread Starter
Forum
Replies
Last Post
travis01996
F-Type ( X152 )
3
09-28-2021 03:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)