Corroded Valve cover bolts and Studs
#21
Join Date: Jan 2012
Location: Newport Beach, California
Posts: 5,668
Received 2,675 Likes
on
1,836 Posts
Use a fuel line disconnect tool to release the connector. The Bank2 cam cover cannot be removed without disconnecting the fuel line.
Once the fuel line is disconnected, cover the fuel rail joint with a rag to prevent dirt entering the system. When reassembling, inspect the o-rings and push the fuel line into the fuel rail until a click is heard.
Once the fuel line is disconnected, cover the fuel rail joint with a rag to prevent dirt entering the system. When reassembling, inspect the o-rings and push the fuel line into the fuel rail until a click is heard.
#22
Join Date: Jan 2012
Location: Newport Beach, California
Posts: 5,668
Received 2,675 Likes
on
1,836 Posts
#23
Use a fuel line disconnect tool to release the connector. The Bank2 cam cover cannot be removed without disconnecting the fuel line.
Once the fuel line is disconnected, cover the fuel rail joint with a rag to prevent dirt entering the system. When reassembling, inspect the o-rings and push the fuel line into the fuel rail until a click is heard.
Once the fuel line is disconnected, cover the fuel rail joint with a rag to prevent dirt entering the system. When reassembling, inspect the o-rings and push the fuel line into the fuel rail until a click is heard.
The following 2 users liked this post by giandanielxk8:
GT'thusiast (03-22-2020),
NBCat (03-17-2020)
Thread
Thread Starter
Forum
Replies
Last Post
Lagonia
XJ XJ6 / XJ8 / XJR ( X350 & X358 )
19
04-18-2021 02:19 PM
Benji999
S-Type / S type R Supercharged V8 ( X200 )
3
11-06-2016 10:56 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)