Fuel Latch STL for 3d Printing
#1
Fuel Latch STL for 3d Printing
My Fuel Latch was starting to crack and let the door not sit flush so I made a copy to 3d Print
I made it for ***** and giggles and looking at online prices im glad I did. Works on my '00 XKR.
Test printed in FDM, old version printed and fit in Resin ok but I don't know if adjusting that extra mm on v3 will change anything so keep some sandpaper handy.
https://www.thingiverse.com/thing:6094715
I made it for ***** and giggles and looking at online prices im glad I did. Works on my '00 XKR.
Test printed in FDM, old version printed and fit in Resin ok but I don't know if adjusting that extra mm on v3 will change anything so keep some sandpaper handy.
https://www.thingiverse.com/thing:6094715
The following 4 users liked this post by JDyer:
#2
The following 3 users liked this post by Kuddlesworth:
#4
I saw that someone in the United Arab Emirates 3D prints parts like those and advertises on instagram...
I found their ebay page:
https://www.ebay.com/usr/mmg3dengineering
The following users liked this post:
Jag#4 (06-26-2023)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)