my car exhaust layout
#1
my car exhaust layout
i'm going to do handmade a 2-1/2" stainless steel sport exhaust, under rear axle, with tru-x perforated core center muffler and 2 rear straight through perforated core by Magnaflow.
3-1/2" quad rear tips by Remus ( you can see OEM vs Remus )
2 sport cats 100 cells with the addition of 2 emulators to avoid errors to the control unit of the car.
sound + performance!
3-1/2" quad rear tips by Remus ( you can see OEM vs Remus )
2 sport cats 100 cells with the addition of 2 emulators to avoid errors to the control unit of the car.
sound + performance!
Last edited by User 070620; 08-24-2015 at 04:29 AM.
The following users liked this post:
blindside (09-24-2018)
#2
The following users liked this post:
User 070620 (08-24-2015)
#3
#6
The following users liked this post:
User 070620 (08-27-2015)
Trending Topics
#8
#9
#10
The following users liked this post:
User 070620 (09-03-2015)
#13
#14
are three days that I tests my car with the new exhaust system and new catalysts to 100 cells (without simulators) . For now, no error signal! maybe because I blindfolded catalysts allowing them to warm up before?
AWESOME performance and sound !!!!!!!!!!
https://www.facebook.com/photo.php?f...9&l=bf9124253d
Last edited by User 070620; 10-23-2015 at 07:51 AM.
#15
#16
#17
#18
How do you disable the downstream O2 sensors?
I put similar cats on a few years ago and when I take her on a long road trip I get the check engine light with the Downsteam O2 sensor right bank as the fault. It only happens when I've been driving the car on the highway for a couple of hours, but none-the-less, I'd prefer not to see the check engine light.
#19
#20
unfortunately as soon as I open the butterfly valve, the traction controls enter and cuts off the power