XK8 / XKR ( X100 ) 1996 - 2006

Only unlock driver's door?

Thread Tools
 
Search this Thread
 
  #1  
Old 11-23-2019, 07:48 PM
Timeisrelative's Avatar
Senior Member
Thread Starter
Join Date: Sep 2018
Location: Pennsylvania
Posts: 789
Received 286 Likes on 183 Posts
Default Only unlock driver's door?

Ok so one thing I don’t necessarily like about my 97 xk8 is that if I stop somewhere after driving and go to open my door, both my driver’s and passenger door unlock. Is there a way to make it where I just unlock my driver’s door when I get out? Maybe being a little paranoid, but oh well
 
  #2  
Old 11-24-2019, 07:50 AM
DavidYau's Avatar
Veteran Member
Join Date: Jan 2019
Location: Bahrain
Posts: 1,906
Received 1,419 Likes on 755 Posts
Default

Timeisrelative,

No idea on that one. In my car, the passenger door opens, for the passenger disembarking, whether the driver's door is locked or not. Not sure if you're trying to have child locks and be a good safe parent......Hmmmmm

FWIW You're a bit picky! Not a bad thing for our X100! Considering when you lock the car, both doors lock at same time ............… then what is the issue?

I did read somewhere that it is possible to set the car so it doesn't lock the doors, when driving, or after you've put it in N. However I suspect that was a dealer option at the initial hand over (that was 20 years ago!).
 
  #3  
Old 11-24-2019, 08:15 AM
Timeisrelative's Avatar
Senior Member
Thread Starter
Join Date: Sep 2018
Location: Pennsylvania
Posts: 789
Received 286 Likes on 183 Posts
Default

It's more of the thought that as soon as I stop somewhere, say a mall parking lot, I go to get out and some thug opens the passenger door and jumps in. I know it's a worst case scenario, and they could just as easily approach the driver's door and wait for me to get out, but people are stupid. I would rather it just unlock the driver's door, then maybe both with a second pull or whatever if I was actually letting a passenger in.
 
  #4  
Old 11-24-2019, 08:33 AM
Join Date: Dec 2009
Location: Wise County,TX
Posts: 12,374
Received 8,320 Likes on 5,022 Posts
Default

You would need to have a dealer level diagnostic to enable/disable the features for your car.
Some cars have more features than others. I used to tell the Showroom Sales guy to get the customer to the shop to enable/disable the features all at ONE TIME so they didn't come back repeatedly and waste time and get charged for shop time. Customers can see what the difference each one has. Then they can decide if it is right for them.

I could turn things on or off and they could actually see it and not just read about it.

bob
 
Attached Files
File Type: pdf
ControlModuleProgramming.pdf (857.3 KB, 50 views)
The following 4 users liked this post by motorcarman:
DavidYau (11-25-2019), michaelh (11-24-2019), sklimii (11-24-2019), Timeisrelative (11-24-2019)
  #5  
Old 11-24-2019, 10:27 AM
Timeisrelative's Avatar
Senior Member
Thread Starter
Join Date: Sep 2018
Location: Pennsylvania
Posts: 789
Received 286 Likes on 183 Posts
Default

Wow! There are a lot of things on there that I never knew were available to do or undo! I wish there was a way to make my rear view mirror stay in night mode! Too many people with LED lights around here 😠. I do wish it had a lever or something like the good old way
 
The following users liked this post:
DavidYau (11-24-2019)
  #6  
Old 11-25-2019, 02:43 AM
dibbit's Avatar
Veteran Member
Join Date: Oct 2010
Location: Spain
Posts: 1,359
Received 538 Likes on 386 Posts
Default

Originally Posted by Timeisrelative
Wow! There are a lot of things on there that I never knew were available to do or undo! I wish there was a way to make my rear view mirror stay in night mode! Too many people with LED lights around here 😠. I do wish it had a lever or something like the good old way
There are two sensors on the mirror, front and back. You could try putting some black tape over the sensor on the front (windscreen side) to make it think it is dark outside and leave the other sensor uncovered so that still gets light - that should trigger the dimming.
 
The following 3 users liked this post by dibbit:
DavidYau (11-25-2019), Johnken (11-25-2019), Timeisrelative (11-25-2019)
  #7  
Old 11-25-2019, 09:20 AM
bladerunner919's Avatar
Senior Member
Join Date: Jan 2016
Location: Berks, UK
Posts: 725
Likes: 0
Received 314 Likes on 236 Posts
Default

Originally Posted by motorcarman
You would need to have a dealer level diagnostic to enable/disable the features for your car.
Some cars have more features than others. I used to tell the Showroom Sales guy to get the customer to the shop to enable/disable the features all at ONE TIME so they didn't come back repeatedly and waste time and get charged for shop time. Customers can see what the difference each one has. Then they can decide if it is right for them.

I could turn things on or off and they could actually see it and not just read about it.

bob
Looking at the list, am I right in thinking that the car can support one-touch up on the driver's window?

 
  #8  
Old 11-25-2019, 11:15 AM
Timeisrelative's Avatar
Senior Member
Thread Starter
Join Date: Sep 2018
Location: Pennsylvania
Posts: 789
Received 286 Likes on 183 Posts
Default

Also the passenger side says the same
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GeorgioTsukolius
X-Type ( X400 )
3
08-21-2016 01:24 PM
XXX-Type
X-Type ( X400 )
1
01-06-2015 10:18 AM
Her jag
X-Type ( X400 )
2
09-26-2014 09:02 AM
charm11
X-Type ( X400 )
12
02-15-2011 07:51 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Only unlock driver's door?



All times are GMT -5. The time now is 10:09 AM.