Reusing Existing SatNav screen for Raspberry Pi?
#21
I did get a touch screen digitizer (in the photos above) which connects to the Raspberry Pi via USB and appears to the system just like another pointing device. Just need to get a virtual keyboard software running on the system and you're good to go...
#22
Hi, I think the best solution is to integrate raspberry using the D2B protocol. Ideally, replace the module GPS navigator for raspberry do their duties and communicate via D2B. Thus the functionality of radio, amplifier, air conditioning, etc ... own car would take advantage.
This would require that Veffremov share his knowledge about the D2B protocol and how to use the Raspberry.
This would require that Veffremov share his knowledge about the D2B protocol and how to use the Raspberry.
#23
Hi, I think the best solution is to integrate raspberry using the D2B protocol. Ideally, replace the module GPS navigator for raspberry do their duties and communicate via D2B. Thus the functionality of radio, amplifier, air conditioning, etc ... own car would take advantage.
This would require that Veffremov share his knowledge about the D2B protocol and how to use the Raspberry.
This would require that Veffremov share his knowledge about the D2B protocol and how to use the Raspberry.
Thread
Thread Starter
Forum
Replies
Last Post
flossin23
S-Type / S type R Supercharged V8 ( X200 )
35
02-19-2016 08:12 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)