When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello all, I have a problem.
While putting in a new rear main seal I apparently knocked 3 of the 4 wires out of the TPS plug, only the black/green wire is still attached.
The wiring diagram in my service manual shows the black/green wire is pin 3, but it is pin 1 in my car, so I can't trust the book.
The wires I have are blue/white, blue, green, and black/green. The plug goes into the TPS vertically.
Could anyone please let me know the correct order of the 4 wires from top to bottom?
Thank you for any assistance.
Thank you Michael!
That's the picture I have in my manual as well, but didn't realize what the -numbers meant.
I should have it back together soon, thank you again!!