Jaguar Forums - Jaguar Enthusiasts Forum
The remote did not come with the kit, but is very hand to have
The remote did not come with the kit, but is very hand to have
0 2019/03/18 07:50:59
Very happy with the look, and the ashtray lid still opens and closes as normal.
Very happy with the look, and the ashtray lid still opens and closes as normal.
0 2019/03/18 07:51:02
Looking pretty sad
Looking pretty sad
0 2019/03/26 04:51:29
Border taped off
Border taped off
0 2019/03/26 04:51:32
Filled in
Filled in
0 2019/03/26 04:51:35
Tape removed, then letters filled in by hand. A toothpick with one end cut to a wedge shape works excellent for cleaning up any coloring outside of the lines.
Tape removed, then letters filled in by hand. A toothpick with one end cut to a wedge shape works excellent for cleaning up any coloring outside of the lines.
0 2019/03/26 04:51:38
0 2019/03/26 04:51:40
Not bad for $0.
Not bad for $0.
0 2019/03/26 04:51:43
Definitely seen better days
Definitely seen better days
0 2019/03/26 04:51:46
Remove the retaining clips from trunk lid liner, and black plastic shroud around latch.
Remove the retaining clips from trunk lid liner, and black plastic shroud around latch.
0 2019/03/26 04:51:49
Plinth comes off by removing now accessible six 10mm nuts and some gentle prying.
Plinth comes off by removing now accessible six 10mm nuts and some gentle prying.
0 2019/03/26 04:51:52
Release button is held in by two small phillips screws.
Release button is held in by two small phillips screws.
0 2019/03/26 04:51:55
New 25mm button, slightly larger than the old. Some trimming will need to be done. It comes backed with a high quality 3M tape.
New 25mm button, slightly larger than the old. Some trimming will need to be done. It comes backed with a high quality 3M tape.
0 2019/03/26 04:51:58
Release the three equally spaced tabs to removed the button base.
Release the three equally spaced tabs to removed the button base.
0 2019/03/26 04:52:01
Base and spring.
Base and spring.
0 2019/03/26 04:52:03
Peel the old button face from the base and clean the surface thoroughly.
Peel the old button face from the base and clean the surface thoroughly.
0 2019/03/26 04:52:06
I've etched a pencil line where the ring needs to be sanded back to. I used a wide metal file, but a dremel, sandpaper, or careful handled razor knife would do the job.
I've etched a pencil line where the ring needs to be sanded back to. I used a wide metal file, but a dremel, sandpaper, or careful handled razor knife would do the job.
0 2019/03/26 04:52:09
The button base now sits proud of the trim.
The button base now sits proud of the trim.
0 2019/03/26 04:52:11
Button face fitted
Button face fitted
0 2019/03/26 04:52:14
Final product
Final product
0 2019/03/26 04:52:17
0 2019/03/26 04:52:20
0 2019/03/26 04:52:22
0 2019/03/26 04:52:25
0 2019/04/03 07:12:18
0 2019/04/03 07:13:17
0 2019/04/08 08:32:29
0 2019/04/08 08:32:31
0 2019/04/08 13:07:14
0 2019/04/08 13:07:27
0 2019/04/08 13:07:36
0 2019/04/18 04:45:51
0 2019/04/25 08:14:57
0 2023/06/06 10:54:52
0 2023/06/06 10:59:37
0 2023/06/06 11:06:54
0 2023/06/06 11:10:47
0 2023/06/06 11:12:20
0 2023/06/06 11:15:05
0 2023/06/06 11:15:41
0 2023/06/06 11:24:49