Addicted2boost
October 31, 2020
Finally getting around to installing the Brembo brakes on my 03’ SV8. Once the front knuckles are off the car and bearing/hub are out of the way, it was much easier than fighting it on the car. First drill the existing hole with a 31/64ths drill bit and follow it with a 1/2” drill bit. I’d highly recommend doing this with a drill press vs freehand unless you have absolute steady hands. Also, very sharp and durable drill bits. 14mm x 1.50 tap used. Grade 10.9 bolts from ACE Hardware.
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!