![](https://www.jaguarforums.com/forum/customavatars/avatar156246_6.gif)
Bigg Will
December 11, 2017
These bolts are on tight, the bolt side is 18mm, the nut side is 17mm always if possible loosen or tighten on the nut side and hold on the bolt side. I braced the wrench against the body and loosen with a 1/2in ratchet with a 12in cheater to undo the drive shaft bolts.
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!