Peter_of_Australia
April 6, 2023
To be able to remove the motor, you need to hammer a pin out and remove 2 bolts (5mm hex key),..and: This will drive you nuts: Remove the connector from under the seat. Very tricky: I knew that system, as it is being used in the engine compartment on some Jags: Push a screwdriver thru under the connector to push that little latch away from the connector, so that you can pull the connector of it's "rail". You pull the connector towards the back of the seat...
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!