Jaguar Forums - Jaguar Enthusiasts Forum
1 2016/04/16 22:34:31
After prep I layed down a layer of Dynamat
After prep I layed down a layer of Dynamat
0 2021/10/17 15:06:54
After prep I layed down a layer of Dynamat
After prep I layed down a layer of Dynamat
0 2021/10/17 14:40:44
0 2021/10/17 14:34:46
Then another layer of heat insulation on the gearbox/transmission tunnel
Then another layer of heat insulation on the gearbox/transmission tunnel
0 2021/10/17 14:29:28
Then I "leveled" the floor with an extra layer of sound/heat dampening
Then I "leveled" the floor with an extra layer of sound/heat dampening
0 2021/10/17 14:27:20
After prep I put down a layer of Dynamat
After prep I put down a layer of Dynamat
0 2021/10/17 14:25:24
0 2021/09/04 20:36:56
This was from a couple weeks ago. You can see the plywood substitute that I have used for the last couple years for the driver side gauges. God willing I'll never go back to that.
This was from a couple weeks ago. You can see the plywood substitute that I have used for the last couple years for the driver side gauges. God willing I'll never go back to that.
0 2021/08/03 17:04:56
Driver gauge cluster in place
Driver gauge cluster in place
0 2021/08/03 17:04:48
0 2021/08/03 17:04:47
0 2021/08/03 17:04:45
0 2021/08/03 17:03:11
0 2021/08/03 17:00:29
My setup is pretty primitive. I beat the bracket into shape on my cheapy Harbor Freight vice and drilled the holes with my cordless drill
My setup is pretty primitive. I beat the bracket into shape on my cheapy Harbor Freight vice and drilled the holes with my cordless drill
0 2021/08/03 17:00:16
First a little "cardboard-aided-design"...
First a little "cardboard-aided-design"...
0 2021/08/03 17:00:07
0 2021/06/13 20:16:29
0 2021/06/13 20:16:01
0 2021/06/13 20:10:31
Almost all of the rust and old adhesive removed
Almost all of the rust and old adhesive removed
0 2019/05/21 23:32:32
Part-way through cleaning the junk off with industrial cleaner.
Part-way through cleaning the junk off with industrial cleaner.
0 2019/05/21 23:32:30
The 3 main components of the front door
The 3 main components of the front door
0 2019/05/21 23:32:29
This held the front post of the window frame. Not sure what the wood was for - sound dampener?
This held the front post of the window frame. Not sure what the wood was for - sound dampener?
0 2019/05/21 23:32:27
Bolt that held the post at the rear of the window frame. It and the bolt that held it have been replaced, as most of the threads were solid rust
Bolt that held the post at the rear of the window frame. It and the bolt that held it have been replaced, as most of the threads were solid rust
0 2019/05/21 23:32:26
Kind-of a "before" shot. Note the old "tar-paper" sound dampener
Kind-of a "before" shot. Note the old "tar-paper" sound dampener
0 2019/05/21 23:31:52
And this is the new one in. I was surprised at how quickly I was able to do this(only about 1.5 hours)
And this is the new one in. I was surprised at how quickly I was able to do this(only about 1.5 hours)
0 2019/03/27 22:15:17
And putting the new one in. This was complicated because I could not see the bolts, and lining up the drive shaft was a bit of a pain.
And putting the new one in. This was complicated because I could not see the bolts, and lining up the drive shaft was a bit of a pain.
0 2019/03/27 22:12:55
This is the old one out
This is the old one out
0 2019/03/27 22:12:30
The bolts that hold this in are Allen heads? What? I was expecting more slot heads (And I would have replaced them)
The bolts that hold this in are Allen heads? What? I was expecting more slot heads (And I would have replaced them)
0 2019/03/27 22:10:29
The tach generator is at the bottom of the pic, with 2 wires leading from it.
The tach generator is at the bottom of the pic, with 2 wires leading from it.
0 2019/03/27 22:09:05
And finally installed in the car. Not perfect, put tons better than what was in the car :)
And finally installed in the car. Not perfect, put tons better than what was in the car :)
0 2019/03/27 21:31:18
All pieces (springs, foam, cover) put together
All pieces (springs, foam, cover) put together
0 2019/03/27 21:30:26
Pinned, ready for sewing
Pinned, ready for sewing
0 2019/03/27 21:29:32
Extremely fortunate "Ebay score". Thank you Pat!
Extremely fortunate "Ebay score". Thank you Pat!
0 2019/03/27 21:28:31
Sewing in stays
Sewing in stays
0 2019/03/27 21:28:09
So, beginning...
So, beginning...
0 2019/03/27 21:27:24
So this is what we're going away from. Deteriorating, stinky, possibly rat-eaten, with springs sticking through. Ick
So this is what we're going away from. Deteriorating, stinky, possibly rat-eaten, with springs sticking through. Ick
0 2019/03/27 21:25:38
0 2019/03/03 20:44:59
0 2017/07/07 10:40:37
0 2017/05/10 22:18:48